FC2ブログ
このブログは、ななろうの平凡な日常を淡々とメモ書きしたものです
過度な期待はしないで下さい
2013年08月31日 (土) 17:31 | 携帯電話 | 編集 |

最近、ドコモのdショッピングを覗く機会があったんだけど
どうしてドコモポイントの使用に
月3000ポイントまでという制限を設けているのでしょうか?

ポイントだけで購入したかったのですが
この制限のお陰で諦めました。

ちょっと不満

そうそう覗いた時に
シリコンパワー
UHS-1対応 microSDHCカード 32GB Class10 2,280円(税込み)
と言うのが出てました。

ほかと比べても、これは安くてお得だと思ったけどどう?



関連記事
2013年08月30日 (金) 18:45 | 携帯電話 | 編集 |
先日ネット注文したSONY CP-F10LSAVP が届いてました。
・前面
2013-08-30 17.37.20

・裏面
2013-08-30 17.37.37

・中には以下の物が入ってました
ACアダプターには製造年月と思われる 2013 07 と印刷されています。
2013-08-30 17.40.12

・バッテリー本体底部にも同様の印刷が在りました。
気になっていた重量260gは持った感じでもソニー製リチウムイオンポリマーのおかげか?
スマートフォンとあまり違いが無く全然に気なる重さではありませんでした。
Panasonic USBモバイル電源 大容量タイプ リチウムイオン 10,260mAh QE-QL301の重量が490gですからこの差は大きいですね。
2013-08-30 17.41.22

・シルバーのアルミボディーは、指紋も目立たずいい感じです。
本体上部に、操作と表示の全てが集約されていて
LEDランプにバッテリー充電用端子とUSB接続端子×2に
充電(ON/OFF)とバッテリー残量チェックを兼ねたスイッチボタンが在ります

本体裏には、バッテリー残量をチェックした時に残量に応じてランプが点滅するのだけど
その点滅回数とバッテリー残量の関係が印刷されていて好感が持てます。
2013-08-30 17.40.26

・付属ACアダプターから直接スマートフォン SO-03Dへ接続しての充電も問題無く付属のケーブルで可能でした。
2013-08-30 17.47.26

・SO-03Dの電池残量2%から100%までの充電には(Wi-FiをOFFにして)120分かかり標準品より70分の充電時間短宿ができ急速充電は可能です。
2013-09-07_1.png


・バッテリー残量チェックをしてみると半分程(残量、中)残っているようなので早速、手持ちのSO-03D で動作の確認です。
ケーブルを接続して上部にあるボタンを押すと充電が問題無く開始されました
2013-08-30 17.48.11_1

・残量30%から100%までアプリを使用しながら約100分かかりましたので急速充電されたようです。
 (充電グラフは、NTT DOCOMO の「ecoモード for Android」を使用し加工しました)
2013-08-30Battery_graph.jpg



充電後残量確認するとのこり四分の一(残量、小)の表示でした。

・そこで旧携帯電話SO906i(FOMA)への充電も確認してみました。
 100円ショップで購入した充電ケーブルを使用して接続し充電してみたところこちらも問題無く充電出来ました。
2013-08-30 20.16.27

・旧携帯電話SO906i(FOMA)への充電が完了後、次にiPod nanoにも専用アダプターで接続しこちらも問題無く充電はできましたが、給電ランプは消えずが手動で停止しました。
取扱説明書には「機器によっては、止まらない場合もある」との記載は在ります。
2013-08-30 22.16.21

最後に、この充電器は充電のON/OFFをスイッチ操作するマニュアルタイプです。
差し込むと自動で充電が開始するタイプの充電器も在りますが
接続した機種に電源のON/OFFが出来ない物の場合は重宝します。

自分の場合も、スマートフォンに充電ケーブル接続したまま充電待機
充電残量の少なくなった案内表示が出てからボタンを押して充電開始という使い方が出来るので嬉しい。
これは車運転中に使用する機会がある場合、
充電する度毎にケーブルを繋げるタイプの充電器ですと非常に難しいですし危険です。

更に、USB LEDランプやUSB 扇風機でも
充電器側のボタン操作でON/OFFできて意外と重宝してます。



SONY CP-F10LSAVP製品データ
●スマートフォンに約4回充電可能(*)な10,000mAhのリチウムイオンバッテリー内蔵
* 弊社試験結果に基づく、約1500mAhのバッテリー搭載スマートフォンでの目安です

●約1000回充電可能(*)
* 弊社試験結果に基づく目安です。機器及び使用条件により、実際の利用回数とは異なります

●スマートフォン・タブレット端末に同時給電できる最大5V/3.6A出力(2ポート合計)

●USB出力ポート×2(*) 2機器に同時充電可能

* 2ポートの出力合計が3.6Aを超えると安全機能により給電を停止します。2ポート同時でのご使用中に安全機能が作動した場合は、どちらか片方の機器を取りはずして1台ずつ給電を行ってください

●アルミボディ採用のフラットデザイン

●電池の残量目安を4段階でお知らせ

●USBケーブル(50cm)・ACアダプター付属

本体
入力:DC5V
出力:DC5V、2ポート 3.6A(最大)
外形寸法:幅70.4×高さ130.6×奥行き16.5mm
質量:260g
動作温度:0℃-35℃

ACアダプター
入力:AC100V-240V 50/60Hz
出力:DC5V、2.1A(最大)
外形寸法:幅41.0×高さ61.0×奥行き26.0mm(電源プラグを除く)
質量:53g
動作温度:0℃-35℃

取扱説明書ダウンロード(PDF)


関連記事
2013年08月28日 (水) 21:04 | 携帯電話 | 編集 |

最近今週末に帝都に進撃予定なのですが
バス移動中に動画を見ようと考えていてスマートフォンの充電器を探してました

これまで、ANKER Astro3E 大容量モバイルバッテリー 10000mAh
約3,000円で第一候補だったんですが
ここに来てSONY スマホ用 薄型FLATタイプUSBポータブル電源 10000mAh
6,000円前半で第一候補になりました

ANKER Astro3Eとの違いは、
繰り返し使用が約1000回充電可能ということで、
値段は倍程しますが壊れなければANKER製は約500回以上なので
初期投資は多いけど使い切れればほぼ同じになりますし
更に信頼性の高い純正の充電用ACアダプターも付いているとなると
逆にお得感も出てきます

そしてスマートフォン・タブレット端末に同時給電できる余裕の最大5V/3.6A出力で
タブレットは持っていないけど合計で3.6Aならば将来性も十分です
ちなみにANKER Astro3Eは合計3.0Aです

重量は260gでANKER Astro3Eの240gより重いのですが
ソニー製はアルミボディを採用しています

そして一番のポイントは、やはり信頼性が高いということにつきます

我輩が所有する同じグループのソニエリ製のドコモSO-03Dにもちろん充電できる様だし
ANKER Astro3Eも勿論可能の様だけと本体充電用に充電器を別に探して購入しなければならないし
もしかすると付属の充電ケーブルでは不可の可能性も在ります
その場合、購入時に同梱されている純正のUSB充電ケーブルの使用で可能になる可能性もあるのだけど

ACアダプターも付属していて出力はDC5V、2.1A(最大)なので、
直接スマホにつないで急速充電も出来そうです

ANKER Astro3Eに付属している
microUSB、Apple、miniUSB、PSPのオプションプラグや
携帯用のポーチはついてませんが、
必要ないと言うことで、ポチっと注文完了です

後は土曜までに届けばいいんだけど

ただANKER Astro3Eもお値段でソニーの半額で
繰り返し充電が半分の500回以上となれば、同等だと自分は思えるので
色投資が少なくて済む魅力的な商品に違いありません
今度比較やレビュー出来る機会があれば(謎)ここで紹介したいと思います

SONY スマホ用 薄型FLATタイプUSBポータブル電源 10000mAh ソニー製リチウムポリマー内臓 CP-F10LSAVPSONY スマホ用 薄型FLATタイプUSBポータブル電源 10000mAh ソニー製リチウムポリマー内蔵 CP-F10LSAVP
(2013/04/17)
ソニー(SONY)

商品詳細を見る


関連記事
2013年08月24日 (土) 13:41 | Xperia SO-03D | 編集 |
Xperia™ acro HD SO-03D のいろんな情報を個人的にちょっとまとめてみました。

・micro SDXC 64GB の使用可能です
 動作保証外で、製造メーカーや個々との相性も在ります。

 Sandisk Mobile Ultra UHS-I SO-03Dでフォーマットし認識動作した報告在り。
 KingMax ×

・急速充電は可能です
 ネット上では、急速充電に対応していないという書き込みが多いですが、SO-03Dは急速充電に対応しています。
 詳しくは過去の書き込み(急速充電できたSO-03D)を参照してください。


・充電対応機種
 購入時に同梱されている物は勿論問題ないのですが、他社製品の物では充電できない機種が存在していて気軽に買えない充電器。
 原因の1つには、USBの規格に「充電専用で使うときにはD+/D-の両端子がショート(短絡)してないといけない」と言うのが在って、これが他社製品では対応してなく充電できないものが在るみたいです。

Xperiaに対応表示している製品を購入すればよいのだけど、簡単に見分けるには充電と通信のモード切り替えスイッチ付きの充電器もしくはUSBケーブルを選べば良いみたいです。


PLANEX Xperia 充電&データ転送 MicroUSBケーブル ブラック (ACアダプタ/パソコン接続切替スイッチ付)BN-XPERIASBPLANEX Xperia 充電&データ転送 MicroUSBケーブル ブラック (ACアダプタ/パソコン接続切替スイッチ付)BN-XPERIASB
(2010/08/27 ブログ登録時827円)
プラネックス

商品詳細を見る

 
関連記事
2013年08月18日 (日) 20:02 | 家電・PC・ゲーム関係 | 編集 |

平成12年に購入した冷蔵庫(日立 R-S381PAM)の
自動製氷機の調子が悪くなりました

症状は、水が貯氷ケースに流れ落ちて固まっていました
製氷機に手を入れてみると製氷皿に氷は存在しています

まず機械的な問題を確認

取扱説明書を見ると
移動や運搬前に自動製氷機にある水や氷を取り除く為の機能が在るので
その機能を利用して確認してみました

まずは、給水タンクを必ず外しましょう
これをしておかないと動作後
製氷皿に水が補給されるのですが
製氷皿に氷が残っているとその水が溢れてこぼれます

次に自動製氷機に強制的に製氷皿を回転させて氷を落とすスイッチが在るので
それを押して動作確認

モーター音がして動作して製氷皿が動いて
製氷皿が傾きそのまま皿がひねられるんだけど
製氷皿にできている氷はそのまま落ちないままでした

氷が落ちない事が原因なので
製氷皿から落ちない氷を取り除かなければなりません

自動製氷機自体は
プラスチック製の爪で固定されているだけなので
爪を押しながらスライドさせると
簡単に外れます

製氷機を外すと
自動製氷機を動作させている配線が本体とつながっているので
コネクターを外して分離します

製氷皿自体もプラスチックの爪で固定されているので
固定している爪を押しながらスライドさせると
製氷皿が外れるのでこびりついている氷を取り除いて元に戻しました

その時は正常に動作していたのだけど
その後も同じ症状が頻繁に再発したので、
分解させないようにシールが貼られたギヤボックスも
ギヤの歯が破損していないか確認する為に
分解しましたけど問題無しでした

ネットで原因を調べてみると
長い期間使用していると製氷皿自体が
劣化や消耗して氷が落ちなくなる事が判明しました

どうやら単純に長年使用している製氷皿の表面がざらつき
製氷皿がひねられても出来た氷がこびりついて落ちないようです

表面をこびりつかないように磨き処理したら直りそうだったのですが
二度手間になるのもいやなので
新品に交換できないかネットで調べてみると
製氷皿が交換部品がまだ取り寄せ可能だったのですぐに注文しました

注文したのは、カデンの救急社

他にも同じ部品を扱っている日立純正部品のパーツ ショップが在ったのですが
決め手は支払い合計金額は同じで製氷機皿代1,050円+送料500円でしたが
今回支払い方法でここはカード払いが合計3,000円以上でしか利用できませんでした

なので必然的にカデンの救急社になりました

しかし他のメーカーの製氷機皿より高額なのはなぜ?

ここで自動製氷を停止し製氷機は取り外したままにして
注文した部品が届くのを待つつもりだったのですが
自動製氷機を外したままの状態だと運転が停止してました

確認するとセンサーが故障と判断し表示ランプが点滅してました

どうやら自動製氷機に付いている温度センサーも外れた為に
温度制御が故障と判断し運転が停止し
冷蔵庫が全く冷えてない状態になってましたので
慌てて自動製氷機を元に戻しました

製氷機は必ず取り付けた状態でないといけない様です

注文後の発送も2営業日で行われて
今日届いた部品を早速交換しました
製氷皿

これで症状は改善されると思うので
しばらく様子見です


追記:交換し二週間経過した8月31日現在、氷が出来ない症状は一度も再発せず改善されてます



追記20160925:日立から消耗品部品を取り寄せることが出来ます
  支払い方法は代引きのみで
  送料は一律540円(税込み) ※但し、一部離島は代金引換がご利用できません
  代引手数料は一律324円(税込み)

  
  日立の家電消耗品インターネット販売|パーツショップ

関連記事
2013年08月09日 (金) 22:54 | 車中泊 | 編集 |
急に伊勢神宮に行ってみたくなりましたのでちょっと富山から伊勢神宮までのコース等を現在調査中!

地元から伊勢神宮までへのコースは大きく分けて2コースあります。
名古屋市内を通過する最短距離のコースと滋賀県を走り遠回りするけど
渋滞が少なく高速料金も安く済む急がばまわれコース

ルート検索でも60km程走行距離が違うのに所要時間はほとんど変わりません

・北陸道 > 名神 > 新名神 > 東名阪道 > 伊勢道
 走行距離:448.3km、所要時間:5時間02分、通常高速料金:9,150円


・北陸道 > 東海北陸道 > 名神 > 名古屋高速 > 名二環 >東名阪道 > 伊勢道
 走行距離:386.9km、所要時間:4時間58分、通常高速料金:9,600円


昼到着で考えていましたが
8/11は出口規制されるので昼間はIC普通車はおりられない様です

パーク&バスライド
規制が始まる10:45前に降りて
無料の外宮駐車場に入れれば内宮にはバス移動で良いみたいで
朝に着くようにした方が良いみたいです

無料のパーク&バスライド利用の方も良さそうです
内宮の駐車場に行くのが残念だけど内宮からバスで外宮に行くのも良いし


実際に伊勢神宮へ向かったブログはこちらです

伊勢神宮巡り 夫婦岩へ編

関連記事
2013年08月04日 (日) 18:28 | メモ | 編集 |
テレビで紹介されていた「エトワール・まっちゃん

洋菓子店でテレビで紹介されていたチーズスフレがふわふわですごく美味しそうなので興味が湧きました。

近くに行く機会があれば立ち寄りたいです。
関連記事
2013年08月04日 (日) 01:49 | Mac | 編集 |

Parallels Desktop8 を使用したWindows 7でReadyBoost機能を使用してみました。

手元にあった8GB USBFlashメモリを設定してWindows エクスペリエンス インデックスでの評価です。

・未設定の数値
未設定

・8GB USBFlashメモリをReadyBoost機能設定した数値
8GB USBメモリー設定

見て解るようにパフォーマンスが上がった数値は一切無く逆に下がった数値が2項目でした。
まぁUSBフラッシュメモリとの相性も在るのでしょうが
今回のReadyBoost機能の使用は我輩の使用環境では無意味のようです。

MacBook Pro 13-inch, Mid 2010, 2.4GHz Intel Core 2 Duo, 8GB1067MHz DDR3
Parallels Desktop8アプリ 割り当てメモリ 4GB



関連記事
2013年08月03日 (土) 13:55 | 家電・PC・ゲーム関係 | 編集 |

今朝は地元にある大型家電店
そろそろ無くなって来ているボディーソープを買いに行って来ました

まずは店頭でスマホをかざしてポイントゲット!の予定が
機種変更をしているのが原因だと思うんだけど仮登録という案内が出ました

その後、購入時にポイントが付かない現金特価のボディーソープを選んで
後のポイントの為に買い物の合計金額を1,000円以上にしたかったので
店頭展示在庫5台限りの現金特価の扇風機 980円が目に入ってチョイスしました

これで1,000円超えになったのでレジに行くと
まずは予想通りスマホが仮登録ということで
”スマホの登録作業をするのでバーコードを表示してください”と来た

アプリを起動したけど我輩のスマホのネットワーク接続は
”Wi-Fi限定”にしているので予想通りアプリは起動しません

ネットワーク接続できないのでバーコード表示できない事を伝えると
「登録してある電話番号を教えて下さい」と来た!

それで出来るなら最初から
「電話番号」か「バーコード表示」と案内してよ


電話番号を伝えて登録も無事に終わり
清算すると請求額が予想金額よりはるかに高い!
一瞬商品を間違えてレジに持ってきたのかと思い確認した所
店のPOSが扇風機が現金特価価格のはずなのに
通常価格でしか登録されていない間違いがあり
こちらが間違いを指摘をして請求額を変更するという
こちらが間違いに気が付かなかったら多くお金を支払っているところでした

そこで支払いを貯まっているポイントで済ませようとすると
今度は、またネットワーク接続が必要だと言ってきた

ここで、堪忍袋が切れた!
なぜネットワーク接続が必要だかは
説明を受けていたけど切れててまったく覚えてません

過去にこのポイントアプリをスマホに移行するのにも
相当悩まされ案内表示された連絡先に連絡を取るなど
手続きに相当な時間と労力を使っていたせいもあり

「はぁ? どれだけ不愉快にさせれば気が済むんだ! そっちで何とかしろ!」
って感じで怒ったら
「店内のWi-Fi接続で対応します」と説明してきた

レジから一時離れこちらでスマホのWi-Fi接続画面を開いた後は
セキュリティーも在るので
スマホを店員に渡してネットワーク登録と接続をして無事登録が完了しました


これで、やっと帰れるとレジに戻り精算をすると
また最初と同じく間違った金額で請求してきたので
ここでトドメです
もうブチ切れてしまいました

店長を呼んでもらいました
店員は店長への事情説明を
我輩にする様に求めてきたので更に切れる!

なぜに不愉快にさせた経緯を不愉快になってしまっている我輩に説明させるの?
意味わからん!
経緯の説明はそちらでしろ!

店長が現れてからは
マニュアル通りの様な平謝り
何となくこの場で穏便に済ませればこれで終了!的な
雰囲気対応だったのがまた癇に障り
不愉快だったので本部に連絡をして
本部の方から謝罪の連絡が来るようにとお願いしました

その後、本部から連絡があり
都合のいいように報告されていたら嫌なので
こちらからも経緯を説明して一件落着なんだけど

最近、色んなストレスが積み重なっていたので
切れやすい状態だったんだろうなぁ

店を出る時にはレジ担当の方と店長には謝まりましたけど
結局最後には自己嫌悪だけが残ってしまいました


関連記事
2013年08月03日 (土) 06:55 | 家電・PC・ゲーム関係 | 編集 |

最近、通勤中にカーナビの動画再生機能を使用しているんだけど
8GBの容量では足りない感が出てきました。

偶然今朝のチラシの中にSDHCカード 16GB クラス10が
1,480円の数量限定で載っていたんだけど、
Amazonで調べてみると同じ製品
(Silicon Power SDHCメモリーカード 16GB (Class10) ブリスターパッケージ 永久保証 SP016GBSDH010V10)が
1,131円
で発売されていました。

数量限定じゃないしこちらのほうが売り切れも無く更にお得です。

更に将来また容量不足を感じてしまうと、
今持っている8GBのカードが不要になってしまうので、
大は小を兼ね今のカーナビが対応している32GBを調べてみると
Team SDHCカード 32GB Class 10 ECOパッケージ 10年保証 TASD32GBC10E
¥1,980というのが在りました。

比較するとカスタマーレビューの使用評価も星2や1の評価が無いし
こちらの方が信頼性も良さそうで永久保証ではない10年保証付きですが十分です。

とりあえずメモ的にカキコしました

Team SDHCカード 32GB Class 10 ECOパッケージ 10年保証 TASD32GBC10ETeam SDHCカード 32GB Class 10 ECOパッケージ 10年保証 TASD32GBC10E
(2013.8.3 ¥1,980)
Team

商品詳細を見る


関連記事
2013年08月03日 (土) 00:03 | 日記 | 編集 |

購入して20年近く放置していた双眼鏡を
使用しようとケースから取り出してみたら、
ケースと双眼鏡のボディーがベタベタ状態。

どうやら素材にポリウレタンを使用していたようで、
表面にコールタールが塗られた様にベタベタになってました。

洗剤で、表面のベタベタを拭きとった時に表面の印刷部分も消えてしまいましたが、
最後に表面の保護艶出し剤を塗って終了!
双眼鏡

何とか使えるようになり、前日修繕したソーラーの水漏れを下より双眼鏡を使って確認してみました。

本日の所は問題無しでした。

ちなみにポリウレタン素材の耐用年数の目安は、製造後3年です


関連記事
2013年08月02日 (金) 23:14 | 映画・ドラマ・アニメ | 編集 |
なんとな〜く観始めた「銀の匙 Silver Spoon

OP曲はmiwa、ED曲はスキマスイッチと有名ドコロを起用しているし、話の内容も毎回すごく考えさせられるアニメです。

中高一貫の進学校に通っていた主人公は、激しい学力競争に疲れノイローゼ気味になるほど自信を喪失し家族と距離を取りたいがために、家に帰らなくても済む全寮制の学校を希望した所、担任に紹介され入学したのが農業高校。

周りの生徒は、家業を継ぐ為だったり将来の目的を持って入学してきている中に、ただ一人目的もなく入学してしまった主人公だったりします。

獣医には、殺す事が出来るかどうかも必要な要素であったり、産みたての卵や食肉用に育てた動物を自ら食す事の苦悩等、家畜を屠殺する事自体は大体解ってはいたけど今までは深く考えずに目の前に出てきた食品を当たり前の用に食していたなぁと考えちゃいます。

今後もちょっと期待したいアニメです
関連記事
2013年08月01日 (木) 22:47 | 日記 | 編集 |

屋根瓦の修繕を業社に頼んでいたのですが、
業社の方から屋根の上の朝日ソーラーから水が漏れているとの報告が在ったそうな。

以前、水漏れは直したんだけどフイルムケースを代用していたので、
高熱に耐えれなかったのかな?と思ってまた確認と修繕の為に屋根に上がりました

一応、前回外したゴムのキャップの穴の開いた部分に
栄養ドリンクのキャップを押し込んで蓋をしてこれに交換する予定でいたのですが…ゴムチャップ
合体


2013-08-01 17.49.03

しかし、全然問題無く水漏れは確認できなかったのです。
きっと前回の水漏れの跡を見て勘違いされたんだと思うんけど、
微妙に気になります。

中を見ると確かに水があふれる寸前で
浮きが微妙に傾いていたので、
取り付け部が傾いていたのが原因で
弁が完全に閉じていなかったのかもしれません。

簡単に傾かない様にして
またしばらくまた様子見ですね


関連記事
2013年08月01日 (木) 19:12 | Mac | 編集 |
ffmpeg-1.2.7/ffmpeg -h long
ffmpeg version 1.2-tessus Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 15 2013 01:18:55 with llvm-gcc 4.2.1 (LLVM build 2336.1.00)
configuration: --prefix=/Users/tessus/data/ext/ffmpeg/sw --as=yasm --extra-version=tessus --disable-shared --enable-static --disable-ffplay --enable-gpl --enable-pthreads --enable-postproc --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-libspeex --enable-bzlib --enable-zlib --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libxavs --enable-version3 --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libgsm --enable-libopus --enable-fontconfig --enable-libfreetype --enable-libass --enable-filters --enable-runtime-cpudetect
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Getting help:
-h -- print basic options
-h long -- print more options
-h full -- print all options (including all format and codec specific options, very long)
See man ffmpeg for detailed description of the options.

Print help / information / capabilities:
-L show license
-h topic show help
-? topic show help
-help topic show help
--help topic show help
-version show version
-formats show available formats
-codecs show available codecs
-decoders show available decoders
-encoders show available encoders
-bsfs show available bit stream filters
-protocols show available protocols
-filters show available filters
-pix_fmts show available pixel formats
-layouts show standard channel layouts
-sample_fmts show available audio sample formats

Global options (affect whole program instead of just one file:
-loglevel loglevel set libav* logging level
-v loglevel set libav* logging level
-report generate a report
-max_alloc bytes set maximum size of a single allocated block
-y overwrite output files
-n do not overwrite output files
-stats print progress report during encoding
-bits_per_raw_sample number set the number of bits per raw sample
-vol volume change audio volume (256=normal)

Advanced global options:
-cpuflags flags force specific cpu flags
-benchmark add timings for benchmarking
-benchmark_all add timings for each task
-progress url write program-readable progress information
-stdin enable or disable interaction on standard input
-timelimit limit set max runtime in seconds
-dump dump each input packet
-hex when dumping packets, also dump the payload
-vsync video sync method
-async audio sync method
-adrift_threshold threshold audio drift threshold
-copyts copy timestamps
-copytb mode copy input stream time base when stream copying
-dts_delta_threshold threshold timestamp discontinuity delta threshold
-dts_error_threshold threshold timestamp error delta threshold
-xerror error exit on error
-filter_complex graph_description create a complex filtergraph
-debug_ts print timestamp debugging info
-intra deprecated use -g 1
-vdt n discard threshold
-sameq Removed
-same_quant Removed
-deinterlace this option is deprecated, use the yadif filter instead
-psnr calculate PSNR of compressed frames
-vstats dump video coding statistics to file
-vstats_file file dump video coding statistics to file
-dc precision intra_dc_precision
-qphist show QP histogram
-vc channel deprecated, use -channel
-tvstd standard deprecated, use -standard
-isync this option is deprecated and does nothing

Per-file main options:
-f fmt force format
-c codec codec name
-codec codec codec name
-pre preset preset name
-map_metadata outfile[,metadata]:infile[,metadata] set metadata information of outfile from infile
-t duration record or transcode "duration" seconds of audio/video
-to time_stop record or transcode stop time
-fs limit_size set the limit file size in bytes
-ss time_off set the start time offset
-timestamp time set the recording timestamp ('now' to set the current time)
-metadata string=string add metadata
-target type specify target file type ("vcd", "svcd", "dvd", "dv", "dv50", "pal-vcd", "ntsc-svcd", ...)
-frames number set the number of frames to record
-filter filter_graph set stream filtergraph
-reinit_filter reinit filtergraph on input parameter changes

Advanced per-file options:
-map [-]input_file_id[:stream_specifier][,sync_file_id[:stream_s set input stream mapping
-map_channel file.stream.channel[:syncfile.syncstream] map an audio channel from one stream to another
-map_chapters input_file_index set chapters mapping
-itsoffset time_off set the input ts offset
-itsscale scale set the input ts scale
-dframes number set the number of data frames to record
-re read input at native frame rate
-shortest finish encoding within shortest input
-copyinkf copy initial non-keyframes
-copypriorss copy or discard frames before start time
-tag fourcc/tag force codec tag/fourcc
-q q use fixed quality scale (VBR)
-qscale q use fixed quality scale (VBR)
-profile profile set profile
-attach filename add an attachment to the output file
-dump_attachment filename extract an attachment into a file
-muxdelay seconds set the maximum demux-decode delay
-muxpreload seconds set the initial demux-decode delay
-bsf bitstream_filters A comma-separated list of bitstream filters
-fpre filename set options from indicated preset file
-dcodec codec force data codec ('copy' to copy stream)

Video options:
-vframes number set the number of video frames to record
-r rate set frame rate (Hz value, fraction or abbreviation)
-s size set frame size (WxH or abbreviation)
-aspect aspect set aspect ratio (4:3, 16:9 or 1.3333, 1.7777)
-bits_per_raw_sample number set the number of bits per raw sample
-vn disable video
-vcodec codec force video codec ('copy' to copy stream)
-timecode hh:mm:ss[:;.]ff set initial TimeCode value.
-pass n select the pass number (1 to 3)
-vf filter_graph set video filters
-b bitrate video bitrate (please use -b:v)
-dn disable data

Advanced Video options:
-pix_fmt format set pixel format
-intra deprecated use -g 1
-vdt n discard threshold
-rc_override override rate control override for specific intervals
-sameq Removed
-same_quant Removed
-passlogfile prefix select two pass log file name prefix
-deinterlace this option is deprecated, use the yadif filter instead
-psnr calculate PSNR of compressed frames
-vstats dump video coding statistics to file
-vstats_file file dump video coding statistics to file
-intra_matrix matrix specify intra matrix coeffs
-inter_matrix matrix specify inter matrix coeffs
-top top=1/bottom=0/auto=-1 field first
-dc precision intra_dc_precision
-vtag fourcc/tag force video tag/fourcc
-qphist show QP histogram
-force_fps force the selected framerate, disable the best supported framerate selection
-streamid streamIndex:value set the value of an outfile streamid
-force_key_frames timestamps force key frames at specified timestamps
-vc channel deprecated, use -channel
-tvstd standard deprecated, use -standard
-vbsf video bitstream_filters deprecated
-vpre preset set the video options to the indicated preset

Audio options:
-aframes number set the number of audio frames to record
-aq quality set audio quality (codec-specific)
-ar rate set audio sampling rate (in Hz)
-ac channels set number of audio channels
-an disable audio
-acodec codec force audio codec ('copy' to copy stream)
-vol volume change audio volume (256=normal)
-af filter_graph set audio filters

Advanced Audio options:
-atag fourcc/tag force audio tag/fourcc
-sample_fmt format set sample format
-channel_layout layout set channel layout
-guess_layout_max set the maximum number of channels to try to guess the channel layout
-absf audio bitstream_filters deprecated
-apre preset set the audio options to the indicated preset

Subtitle options:
-s size set frame size (WxH or abbreviation)
-sn disable subtitle
-scodec codec force subtitle codec ('copy' to copy stream)
-stag fourcc/tag force subtitle tag/fourcc
-fix_sub_duration fix subtitles duration
-spre preset set the subtitle options to the indicated preset
関連記事
2013年08月01日 (木) 19:08 | Mac | 編集 |
ffmpeg-1.2.7/ffmpeg -h
ffmpeg version 1.2-tessus Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 15 2013 01:18:55 with llvm-gcc 4.2.1 (LLVM build 2336.1.00)
configuration: --prefix=/Users/tessus/data/ext/ffmpeg/sw --as=yasm --extra-version=tessus --disable-shared --enable-static --disable-ffplay --enable-gpl --enable-pthreads --enable-postproc --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-libspeex --enable-bzlib --enable-zlib --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libxavs --enable-version3 --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libgsm --enable-libopus --enable-fontconfig --enable-libfreetype --enable-libass --enable-filters --enable-runtime-cpudetect
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Getting help:
-h -- print basic options
-h long -- print more options
-h full -- print all options (including all format and codec specific options, very long)
See man ffmpeg for detailed description of the options.

Print help / information / capabilities:
-L show license
-h topic show help
-? topic show help
-help topic show help
--help topic show help
-version show version
-formats show available formats
-codecs show available codecs
-decoders show available decoders
-encoders show available encoders
-bsfs show available bit stream filters
-protocols show available protocols
-filters show available filters
-pix_fmts show available pixel formats
-layouts show standard channel layouts
-sample_fmts show available audio sample formats

Global options (affect whole program instead of just one file:
-loglevel loglevel set libav* logging level
-v loglevel set libav* logging level
-report generate a report
-max_alloc bytes set maximum size of a single allocated block
-y overwrite output files
-n do not overwrite output files
-stats print progress report during encoding
-bits_per_raw_sample number set the number of bits per raw sample
-vol volume change audio volume (256=normal)

Per-file main options:
-f fmt force format
-c codec codec name
-codec codec codec name
-pre preset preset name
-map_metadata outfile[,metadata]:infile[,metadata] set metadata information of outfile from infile
-t duration record or transcode "duration" seconds of audio/video
-to time_stop record or transcode stop time
-fs limit_size set the limit file size in bytes
-ss time_off set the start time offset
-timestamp time set the recording timestamp ('now' to set the current time)
-metadata string=string add metadata
-target type specify target file type ("vcd", "svcd", "dvd", "dv", "dv50", "pal-vcd", "ntsc-svcd", ...)
-frames number set the number of frames to record
-filter filter_graph set stream filtergraph
-reinit_filter reinit filtergraph on input parameter changes

Video options:
-vframes number set the number of video frames to record
-r rate set frame rate (Hz value, fraction or abbreviation)
-s size set frame size (WxH or abbreviation)
-aspect aspect set aspect ratio (4:3, 16:9 or 1.3333, 1.7777)
-bits_per_raw_sample number set the number of bits per raw sample
-vn disable video
-vcodec codec force video codec ('copy' to copy stream)
-timecode hh:mm:ss[:;.]ff set initial TimeCode value.
-pass n select the pass number (1 to 3)
-vf filter_graph set video filters
-b bitrate video bitrate (please use -b:v)
-dn disable data

Audio options:
-aframes number set the number of audio frames to record
-aq quality set audio quality (codec-specific)
-ar rate set audio sampling rate (in Hz)
-ac channels set number of audio channels
-an disable audio
-acodec codec force audio codec ('copy' to copy stream)
-vol volume change audio volume (256=normal)
-af filter_graph set audio filters

Subtitle options:
-s size set frame size (WxH or abbreviation)
-sn disable subtitle
-scodec codec force subtitle codec ('copy' to copy stream)
-stag fourcc/tag force subtitle tag/fourcc
-fix_sub_duration fix subtitles duration
-spre preset set the subtitle options to the indicated preset
関連記事
2013年08月01日 (木) 19:03 | Mac | 編集 |
/ffmpeg-1.2.7/ffmpeg -h full

ffmpeg version 1.2-tessus Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 15 2013 01:18:55 with llvm-gcc 4.2.1 (LLVM build 2336.1.00)
configuration: --prefix=/Users/tessus/data/ext/ffmpeg/sw --as=yasm --extra-version=tessus --disable-shared --enable-static --disable-ffplay --enable-gpl --enable-pthreads --enable-postproc --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-libspeex --enable-bzlib --enable-zlib --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libxavs --enable-version3 --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libgsm --enable-libopus --enable-fontconfig --enable-libfreetype --enable-libass --enable-filters --enable-runtime-cpudetect
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
Hyper fast Audio and Video encoder
usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}...

Getting help:
-h -- print basic options
-h long -- print more options
-h full -- print all options (including all format and codec specific options, very long)
See man ffmpeg for detailed description of the options.

Print help / information / capabilities:
-L show license
-h topic show help
-? topic show help
-help topic show help
--help topic show help
-version show version
-formats show available formats
-codecs show available codecs
-decoders show available decoders
-encoders show available encoders
-bsfs show available bit stream filters
-protocols show available protocols
-filters show available filters
-pix_fmts show available pixel formats
-layouts show standard channel layouts
-sample_fmts show available audio sample formats

Global options (affect whole program instead of just one file:
-loglevel loglevel set libav* logging level
-v loglevel set libav* logging level
-report generate a report
-max_alloc bytes set maximum size of a single allocated block
-y overwrite output files
-n do not overwrite output files
-stats print progress report during encoding
-bits_per_raw_sample number set the number of bits per raw sample
-vol volume change audio volume (256=normal)

Advanced global options:
-cpuflags flags force specific cpu flags
-benchmark add timings for benchmarking
-benchmark_all add timings for each task
-progress url write program-readable progress information
-stdin enable or disable interaction on standard input
-timelimit limit set max runtime in seconds
-dump dump each input packet
-hex when dumping packets, also dump the payload
-vsync video sync method
-async audio sync method
-adrift_threshold threshold audio drift threshold
-copyts copy timestamps
-copytb mode copy input stream time base when stream copying
-dts_delta_threshold threshold timestamp discontinuity delta threshold
-dts_error_threshold threshold timestamp error delta threshold
-xerror error exit on error
-filter_complex graph_description create a complex filtergraph
-debug_ts print timestamp debugging info
-intra deprecated use -g 1
-vdt n discard threshold
-sameq Removed
-same_quant Removed
-deinterlace this option is deprecated, use the yadif filter instead
-psnr calculate PSNR of compressed frames
-vstats dump video coding statistics to file
-vstats_file file dump video coding statistics to file
-dc precision intra_dc_precision
-qphist show QP histogram
-vc channel deprecated, use -channel
-tvstd standard deprecated, use -standard
-isync this option is deprecated and does nothing

Per-file main options:
-f fmt force format
-c codec codec name
-codec codec codec name
-pre preset preset name
-map_metadata outfile[,metadata]:infile[,metadata] set metadata information of outfile from infile
-t duration record or transcode "duration" seconds of audio/video
-to time_stop record or transcode stop time
-fs limit_size set the limit file size in bytes
-ss time_off set the start time offset
-timestamp time set the recording timestamp ('now' to set the current time)
-metadata string=string add metadata
-target type specify target file type ("vcd", "svcd", "dvd", "dv", "dv50", "pal-vcd", "ntsc-svcd", ...)
-frames number set the number of frames to record
-filter filter_graph set stream filtergraph
-reinit_filter reinit filtergraph on input parameter changes

Advanced per-file options:
-map [-]input_file_id[:stream_specifier][,sync_file_id[:stream_s set input stream mapping
-map_channel file.stream.channel[:syncfile.syncstream] map an audio channel from one stream to another
-map_chapters input_file_index set chapters mapping
-itsoffset time_off set the input ts offset
-itsscale scale set the input ts scale
-dframes number set the number of data frames to record
-re read input at native frame rate
-shortest finish encoding within shortest input
-copyinkf copy initial non-keyframes
-copypriorss copy or discard frames before start time
-tag fourcc/tag force codec tag/fourcc
-q q use fixed quality scale (VBR)
-qscale q use fixed quality scale (VBR)
-profile profile set profile
-attach filename add an attachment to the output file
-dump_attachment filename extract an attachment into a file
-muxdelay seconds set the maximum demux-decode delay
-muxpreload seconds set the initial demux-decode delay
-bsf bitstream_filters A comma-separated list of bitstream filters
-fpre filename set options from indicated preset file
-dcodec codec force data codec ('copy' to copy stream)

Video options:
-vframes number set the number of video frames to record
-r rate set frame rate (Hz value, fraction or abbreviation)
-s size set frame size (WxH or abbreviation)
-aspect aspect set aspect ratio (4:3, 16:9 or 1.3333, 1.7777)
-bits_per_raw_sample number set the number of bits per raw sample
-vn disable video
-vcodec codec force video codec ('copy' to copy stream)
-timecode hh:mm:ss[:;.]ff set initial TimeCode value.
-pass n select the pass number (1 to 3)
-vf filter_graph set video filters
-b bitrate video bitrate (please use -b:v)
-dn disable data

Advanced Video options:
-pix_fmt format set pixel format
-intra deprecated use -g 1
-vdt n discard threshold
-rc_override override rate control override for specific intervals
-sameq Removed
-same_quant Removed
-passlogfile prefix select two pass log file name prefix
-deinterlace this option is deprecated, use the yadif filter instead
-psnr calculate PSNR of compressed frames
-vstats dump video coding statistics to file
-vstats_file file dump video coding statistics to file
-intra_matrix matrix specify intra matrix coeffs
-inter_matrix matrix specify inter matrix coeffs
-top top=1/bottom=0/auto=-1 field first
-dc precision intra_dc_precision
-vtag fourcc/tag force video tag/fourcc
-qphist show QP histogram
-force_fps force the selected framerate, disable the best supported framerate selection
-streamid streamIndex:value set the value of an outfile streamid
-force_key_frames timestamps force key frames at specified timestamps
-vc channel deprecated, use -channel
-tvstd standard deprecated, use -standard
-vbsf video bitstream_filters deprecated
-vpre preset set the video options to the indicated preset

Audio options:
-aframes number set the number of audio frames to record
-aq quality set audio quality (codec-specific)
-ar rate set audio sampling rate (in Hz)
-ac channels set number of audio channels
-an disable audio
-acodec codec force audio codec ('copy' to copy stream)
-vol volume change audio volume (256=normal)
-af filter_graph set audio filters

Advanced Audio options:
-atag fourcc/tag force audio tag/fourcc
-sample_fmt format set sample format
-channel_layout layout set channel layout
-guess_layout_max set the maximum number of channels to try to guess the channel layout
-absf audio bitstream_filters deprecated
-apre preset set the audio options to the indicated preset

Subtitle options:
-s size set frame size (WxH or abbreviation)
-sn disable subtitle
-scodec codec force subtitle codec ('copy' to copy stream)
-stag fourcc/tag force subtitle tag/fourcc
-fix_sub_duration fix subtitles duration
-spre preset set the subtitle options to the indicated preset


AVCodecContext AVOptions:
-b (int) E..VA. set bitrate (in bits/s) (from 0 to INT_MAX)
-ab (int) E...A. set bitrate (in bits/s) (from 0 to INT_MAX)
-bt (int) E..V.. Set video bitrate tolerance (in bits/s). In 1-pass mode, bitrate tolerance specifies how far ratecontrol is willing to deviate from the target average bitrate value. This is not related to minimum/maximum bitrate. Lowering tolerance too much has an adverse effect on quality. (from 1 to INT_MAX)
-flags (flags) ED.VAS
mv4 E..V.. use four motion vectors per macroblock (MPEG-4)
qpel E..V.. use 1/4-pel motion compensation
loop E..V.. use loop filter
gmc E..V.. use gmc
mv0 E..V.. always try a mb with mv=(0,0)
gray ED.V.. only decode/encode grayscale
psnr E..V.. error[?] variables will be set during encoding
naq E..V.. normalize adaptive quantization
ildct E..V.. use interlaced DCT
low_delay ED.V.. force low delay
global_header E..VA. place global headers in extradata instead of every keyframe
bitexact ED.VAS use only bitexact functions (except (I)DCT)
aic E..V.. H.263 advanced intra coding / MPEG-4 AC prediction
cbp E..V.. Deprecated, use mpegvideo private options instead
qprd E..V.. Deprecated, use mpegvideo private options instead
ilme E..V.. interlaced motion estimation
cgop E..V.. closed GOP
-me_method (int) E..V.. set motion estimation method (from INT_MIN to INT_MAX)
zero E..V.. zero motion estimation (fastest)
full E..V.. full motion estimation (slowest)
epzs E..V.. EPZS motion estimation (default)
esa E..V.. esa motion estimation (alias for full)
tesa E..V.. tesa motion estimation
dia E..V.. diamond motion estimation (alias for EPZS)
log E..V.. log motion estimation
phods E..V.. phods motion estimation
x1 E..V.. X1 motion estimation
hex E..V.. hex motion estimation
umh E..V.. umh motion estimation
iter E..V.. iter motion estimation
-g (int) E..V.. set the group of picture (GOP) size (from INT_MIN to INT_MAX)
-ar (int) ED..A. set audio sampling rate (in Hz) (from INT_MIN to INT_MAX)
-ac (int) ED..A. set number of audio channels (from INT_MIN to INT_MAX)
-cutoff (int) E...A. set cutoff bandwidth (from INT_MIN to INT_MAX)
-frame_size (int) E...A. (from INT_MIN to INT_MAX)
-qcomp (float) E..V.. video quantizer scale compression (VBR). Constant of ratecontrol equation. Recommended range for default rc_eq: 0.0-1.0 (from -3.40282e+38 to FLT_MAX)
-qblur (float) E..V.. video quantizer scale blur (VBR) (from -1 to FLT_MAX)
-qmin (int) E..V.. minimum video quantizer scale (VBR) (from -1 to 69)
-qmax (int) E..V.. maximum video quantizer scale (VBR) (from -1 to 1024)
-qdiff (int) E..V.. maximum difference between the quantizer scales (VBR) (from INT_MIN to INT_MAX)
-bf (int) E..V.. use 'frames' B frames (from -1 to 16)
-b_qfactor (float) E..V.. QP factor between P- and B-frames (from -3.40282e+38 to FLT_MAX)
-rc_strategy (int) E..V.. ratecontrol method (from INT_MIN to INT_MAX)
-b_strategy (int) E..V.. strategy to choose between I/P/B-frames (from INT_MIN to INT_MAX)
-ps (int) E..V.. RTP payload size in bytes (from INT_MIN to INT_MAX)
-bug (flags) .D.V.. work around not autodetected encoder bugs
autodetect .D.V..
old_msmpeg4 .D.V.. some old lavc-generated MSMPEG4v3 files (no autodetection)
xvid_ilace .D.V.. Xvid interlacing bug (autodetected if FOURCC == XVIX)
ump4 .D.V.. (autodetected if FOURCC == UMP4)
no_padding .D.V.. padding bug (autodetected)
amv .D.V..
ac_vlc .D.V.. illegal VLC bug (autodetected per FOURCC)
qpel_chroma .D.V..
std_qpel .D.V.. old standard qpel (autodetected per FOURCC/version)
qpel_chroma2 .D.V..
direct_blocksize .D.V.. direct-qpel-blocksize bug (autodetected per FOURCC/version)
edge .D.V.. edge padding bug (autodetected per FOURCC/version)
hpel_chroma .D.V..
dc_clip .D.V..
ms .D.V.. work around various bugs in Microsoft's broken decoders
trunc .D.V.. truncated frames
-lelim (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider DC coefficient) (from INT_MIN to INT_MAX)
-celim (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider DC coefficient) (from INT_MIN to INT_MAX)
-strict (int) ED.VA. how strictly to follow the standards (from INT_MIN to INT_MAX)
very ED.V.. strictly conform to a older more strict version of the spec or reference software
strict ED.V.. strictly conform to all the things in the spec no matter what the consequences
normal ED.V..
unofficial ED.V.. allow unofficial extensions
experimental ED.V.. allow non-standardized experimental things
-b_qoffset (float) E..V.. QP offset between P- and B-frames (from -3.40282e+38 to FLT_MAX)
-err_detect (flags) .D.VA. set error detection flags
crccheck .D.VA. verify embedded CRCs
bitstream .D.VA. detect bitstream specification deviations
buffer .D.VA. detect improper bitstream length
explode .D.VA. abort decoding on minor error detection
careful .D.VA. consider things that violate the spec and have not been seen in the wild as errors
compliant .D.VA. consider all spec non compliancies as errors
aggressive .D.VA. consider things that a sane encoder should not do as an error
-mpeg_quant (int) E..V.. use MPEG quantizers instead of H.263 (from INT_MIN to INT_MAX)
-qsquish (float) E..V.. how to keep quantizer between qmin and qmax (0 = clip, 1 = use differentiable function) (from 0 to 99)
-rc_qmod_amp (float) E..V.. experimental quantizer modulation (from -3.40282e+38 to FLT_MAX)
-rc_qmod_freq (int) E..V.. experimental quantizer modulation (from INT_MIN to INT_MAX)
-rc_eq (string) E..V.. Set rate control equation. When computing the expression, besides the standard functions defined in the section 'Expression Evaluation', the following functions are available: bits2qp(bits), qp2bits(qp). Also the following constants are available: iTex pTex tex mv fCode iCount mcVar var isI isP isB avgQP qComp avgIITex avgPITex avgPPTex avgBPTex avgTex.
-maxrate (int) E..VA. Set maximum bitrate tolerance (in bits/s). Requires bufsize to be set. (from INT_MIN to INT_MAX)
-minrate (int) E..VA. Set minimum bitrate tolerance (in bits/s). Most useful in setting up a CBR encode. It is of little use otherwise. (from INT_MIN to INT_MAX)
-bufsize (int) E..VA. set ratecontrol buffer size (in bits) (from INT_MIN to INT_MAX)
-rc_buf_aggressivity (float) E..V.. currently useless (from -3.40282e+38 to FLT_MAX)
-i_qfactor (float) E..V.. QP factor between P- and I-frames (from -3.40282e+38 to FLT_MAX)
-i_qoffset (float) E..V.. QP offset between P- and I-frames (from -3.40282e+38 to FLT_MAX)
-rc_init_cplx (float) E..V.. initial complexity for 1-pass encoding (from -3.40282e+38 to FLT_MAX)
-dct (int) E..V.. DCT algorithm (from 0 to INT_MAX)
auto E..V.. autoselect a good one (default)
fastint E..V.. fast integer
int E..V.. accurate integer
mmx E..V..
altivec E..V..
faan E..V.. floating point AAN DCT
-lumi_mask (float) E..V.. compresses bright areas stronger than medium ones (from -3.40282e+38 to FLT_MAX)
-tcplx_mask (float) E..V.. temporal complexity masking (from -3.40282e+38 to FLT_MAX)
-scplx_mask (float) E..V.. spatial complexity masking (from -3.40282e+38 to FLT_MAX)
-p_mask (float) E..V.. inter masking (from -3.40282e+38 to FLT_MAX)
-dark_mask (float) E..V.. compresses dark areas stronger than medium ones (from -3.40282e+38 to FLT_MAX)
-idct (int) ED.V.. select IDCT implementation (from 0 to INT_MAX)
auto ED.V..
int ED.V..
simple ED.V..
simplemmx ED.V..
libmpeg2mmx ED.V..
mmi ED.V..
arm ED.V..
altivec ED.V..
sh4 ED.V..
simplearm ED.V..
simplearmv5te ED.V..
simplearmv6 ED.V..
simpleneon ED.V..
simplealpha ED.V..
h264 ED.V..
vp3 ED.V..
ipp ED.V..
xvidmmx ED.V..
faani ED.V.. floating point AAN IDCT
-ec (flags) .D.V.. set error concealment strategy
guess_mvs .D.V.. iterative motion vector (MV) search (slow)
deblock .D.V.. use strong deblock filter for damaged MBs
-pred (int) E..V.. prediction method (from INT_MIN to INT_MAX)
left E..V..
plane E..V..
median E..V..
-aspect (rational) E..V.. sample aspect ratio (from 0 to 10)
-debug (flags) ED.VAS print specific debug info
pict .D.V.. picture info
rc E..V.. rate control
bitstream .D.V..
mb_type .D.V.. macroblock (MB) type
qp .D.V.. per-block quantization parameter (QP)
mv .D.V.. motion vector
dct_coeff .D.V..
skip .D.V..
startcode .D.V..
pts .D.V..
er .D.V.. error recognition
mmco .D.V.. memory management control operations (H.264)
bugs .D.V..
vis_qp .D.V.. visualize quantization parameter (QP), lower QP are tinted greener
vis_mb_type .D.V.. visualize block types
buffers .D.V.. picture buffer allocations
thread_ops .D.V.. threading operations
-vismv (int) .D.V.. visualize motion vectors (MVs) (from 0 to INT_MAX)
pf .D.V.. forward predicted MVs of P-frames
bf .D.V.. forward predicted MVs of B-frames
bb .D.V.. backward predicted MVs of B-frames
-cmp (int) E..V.. full-pel ME compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-subcmp (int) E..V.. sub-pel ME compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-mbcmp (int) E..V.. macroblock compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-ildctcmp (int) E..V.. interlaced DCT compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-dia_size (int) E..V.. diamond type & size for motion estimation (from INT_MIN to INT_MAX)
-last_pred (int) E..V.. amount of motion predictors from the previous frame (from INT_MIN to INT_MAX)
-preme (int) E..V.. pre motion estimation (from INT_MIN to INT_MAX)
-precmp (int) E..V.. pre motion estimation compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-pre_dia_size (int) E..V.. diamond type & size for motion estimation pre-pass (from INT_MIN to INT_MAX)
-subq (int) E..V.. sub-pel motion estimation quality (from INT_MIN to INT_MAX)
-me_range (int) E..V.. limit motion vectors range (1023 for DivX player) (from INT_MIN to INT_MAX)
-ibias (int) E..V.. intra quant bias (from INT_MIN to INT_MAX)
-pbias (int) E..V.. inter quant bias (from INT_MIN to INT_MAX)
-global_quality (int) E..VA. (from INT_MIN to INT_MAX)
-coder (int) E..V.. (from INT_MIN to INT_MAX)
vlc E..V.. variable length coder / Huffman coder
ac E..V.. arithmetic coder
raw E..V.. raw (no encoding)
rle E..V.. run-length coder
deflate E..V.. deflate-based coder
-context (int) E..V.. context model (from INT_MIN to INT_MAX)
-mbd (int) E..V.. macroblock decision algorithm (high quality mode) (from 0 to 2)
simple E..V.. use mbcmp (default)
bits E..V.. use fewest bits
rd E..V.. use best rate distortion
-sc_threshold (int) E..V.. scene change threshold (from INT_MIN to INT_MAX)
-lmin (int) E..V.. minimum Lagrange factor (VBR) (from 0 to INT_MAX)
-lmax (int) E..V.. maximum Lagrange factor (VBR) (from 0 to INT_MAX)
-nr (int) E..V.. noise reduction (from INT_MIN to INT_MAX)
-rc_init_occupancy (int) E..V.. number of bits which should be loaded into the rc buffer before decoding starts (from INT_MIN to INT_MAX)
-inter_threshold (int) E..V.. (from INT_MIN to INT_MAX)
-flags2 (flags) ED.VA.
fast E..V.. allow non-spec-compliant speedup tricks
sgop E..V.. Deprecated, use mpegvideo private options instead
noout E..V.. skip bitstream encoding
ignorecrop .D.V.. ignore cropping information from sps
local_header E..V.. place global headers at every keyframe instead of in extradata
chunks .D.V.. Frame data might be split into multiple chunks
showall .D.V.. Show all frames before the first keyframe
skiprd E..V.. Deprecated, use mpegvideo private options instead
-error (int) E..V.. (from INT_MIN to INT_MAX)
-qns (int) E..V.. deprecated, use mpegvideo private options instead (from INT_MIN to INT_MAX)
-threads (int) ED.V.. (from 0 to INT_MAX)
auto ED.V.. autodetect a suitable number of threads to use
-me_threshold (int) E..V.. motion estimation threshold (from INT_MIN to INT_MAX)
-mb_threshold (int) E..V.. macroblock threshold (from INT_MIN to INT_MAX)
-dc (int) E..V.. intra_dc_precision (from INT_MIN to INT_MAX)
-nssew (int) E..V.. nsse weight (from INT_MIN to INT_MAX)
-skip_top (int) .D.V.. number of macroblock rows at the top which are skipped (from INT_MIN to INT_MAX)
-skip_bottom (int) .D.V.. number of macroblock rows at the bottom which are skipped (from INT_MIN to INT_MAX)
-profile (int) E..VA. (from INT_MIN to INT_MAX)
unknown E..VA.
aac_main E...A.
aac_low E...A.
aac_ssr E...A.
aac_ltp E...A.
aac_he E...A.
aac_he_v2 E...A.
aac_ld E...A.
aac_eld E...A.
dts E...A.
dts_es E...A.
dts_96_24 E...A.
dts_hd_hra E...A.
dts_hd_ma E...A.
-level (int) E..VA. (from INT_MIN to INT_MAX)
unknown E..VA.
-lowres (int) .D.VA. decode at 1= 1/2, 2=1/4, 3=1/8 resolutions (from 0 to INT_MAX)
-skip_threshold (int) E..V.. frame skip threshold (from INT_MIN to INT_MAX)
-skip_factor (int) E..V.. frame skip factor (from INT_MIN to INT_MAX)
-skip_exp (int) E..V.. frame skip exponent (from INT_MIN to INT_MAX)
-skipcmp (int) E..V.. frame skip compare function (from INT_MIN to INT_MAX)
sad E..V.. sum of absolute differences, fast (default)
sse E..V.. sum of squared errors
satd E..V.. sum of absolute Hadamard transformed differences
dct E..V.. sum of absolute DCT transformed differences
psnr E..V.. sum of squared quantization errors (avoid, low quality)
bit E..V.. number of bits needed for the block
rd E..V.. rate distortion optimal, slow
zero E..V.. 0
vsad E..V.. sum of absolute vertical differences
vsse E..V.. sum of squared vertical differences
nsse E..V.. noise preserving sum of squared differences
w53 E..V.. 5/3 wavelet, only used in snow
w97 E..V.. 9/7 wavelet, only used in snow
dctmax E..V..
chroma E..V..
-border_mask (float) E..V.. increase the quantizer for macroblocks close to borders (from -3.40282e+38 to FLT_MAX)
-mblmin (int) E..V.. minimum macroblock Lagrange factor (VBR) (from 1 to 32767)
-mblmax (int) E..V.. maximum macroblock Lagrange factor (VBR) (from 1 to 32767)
-mepc (int) E..V.. motion estimation bitrate penalty compensation (1.0 = 256) (from INT_MIN to INT_MAX)
-skip_loop_filter (int) .D.V.. (from INT_MIN to INT_MAX)
none .D.V..
default .D.V..
noref .D.V..
bidir .D.V..
nokey .D.V..
all .D.V..
-skip_idct (int) .D.V.. (from INT_MIN to INT_MAX)
none .D.V..
default .D.V..
noref .D.V..
bidir .D.V..
nokey .D.V..
all .D.V..
-skip_frame (int) .D.V.. (from INT_MIN to INT_MAX)
none .D.V..
default .D.V..
noref .D.V..
bidir .D.V..
nokey .D.V..
all .D.V..
-bidir_refine (int) E..V.. refine the two motion vectors used in bidirectional macroblocks (from 0 to 4)
-brd_scale (int) E..V.. downscale frames for dynamic B-frame decision (from 0 to 10)
-keyint_min (int) E..V.. minimum interval between IDR-frames (from INT_MIN to INT_MAX)
-refs (int) E..V.. reference frames to consider for motion compensation (from INT_MIN to INT_MAX)
-chromaoffset (int) E..V.. chroma QP offset from luma (from INT_MIN to INT_MAX)
-trellis (int) E..VA. rate-distortion optimal quantization (from INT_MIN to INT_MAX)
-sc_factor (int) E..V.. multiplied by qscale for each frame and added to scene_change_score (from 0 to INT_MAX)
-mv0_threshold (int) E..V.. (from 0 to INT_MAX)
-b_sensitivity (int) E..V.. adjust sensitivity of b_frame_strategy 1 (from 1 to INT_MAX)
-compression_level (int) E..VA. (from INT_MIN to INT_MAX)
-min_prediction_order (int) E...A. (from INT_MIN to INT_MAX)
-max_prediction_order (int) E...A. (from INT_MIN to INT_MAX)
-timecode_frame_start (int64) E..V.. GOP timecode frame start number, in non-drop-frame format (from 0 to I64_MAX)
-request_channels (int) .D..A. set desired number of audio channels (from 0 to INT_MAX)
-channel_layout (int64) ED..A. (from 0 to I64_MAX)
-request_channel_layout (int64) .D..A. (from 0 to I64_MAX)
-rc_max_vbv_use (float) E..V.. (from 0 to FLT_MAX)
-rc_min_vbv_use (float) E..V.. (from 0 to FLT_MAX)
-ticks_per_frame (int) ED.VA. (from 1 to INT_MAX)
-color_primaries (int) ED.V.. (from 1 to 8)
-color_trc (int) ED.V.. (from 1 to 7)
-colorspace (int) ED.V.. (from 1 to 8)
-color_range (int) ED.V.. (from 0 to 2)
-chroma_sample_location (int) ED.V.. (from 0 to 6)
-slices (int) E..V.. number of slices, used in parallelized encoding (from 0 to INT_MAX)
-thread_type (flags) ED.V.. select multithreading type
slice ED.V..
frame ED.V..
-audio_service_type (int) E...A. audio service type (from 0 to 8)
ma E...A. Main Audio Service
ef E...A. Effects
vi E...A. Visually Impaired
hi E...A. Hearing Impaired
di E...A. Dialogue
co E...A. Commentary
em E...A. Emergency
vo E...A. Voice Over
ka E...A. Karaoke
-request_sample_fmt (sample_fmt) .D..A. sample format audio decoders should prefer
-sub_charenc (string) .D...S set input text subtitles character encoding
-sub_charenc_mode (flags) .D...S set input text subtitles character encoding mode
do_nothing .D...S
auto .D...S
pre_decoder .D...S

cljr encoder AVOptions:
-dither_type (int) E..V.. Dither type (from 0 to 2)

dnxhd AVOptions:
-nitris_compat (int) E..V.. encode with Avid Nitris compatibility (from 0 to 1)

ffv1 encoder AVOptions:
-slicecrc (int) E..V.. Protect slices with CRCs (from -1 to 1)

flv encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

frwu Decoder AVOptions:
-change_field_order (int) .D.V.. Change field order (from 0 to 1)

gif decoder AVOptions:
-trans_color (int) .D.V.. color value (ARGB) that is used instead of transparent color (from 0 to 4.29497e+09)

h261 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

H.263 encoder AVOptions:
-obmc (int) E..V.. use overlapped block motion compensation. (from 0 to 1)
-structured_slices (int) E..V.. Write slice start position at every GOB header instead of just GOB number. (from 0 to 1)
-mb_info (int) E..V.. emit macroblock info for RFC 2190 packetization, the parameter value is the maximum payload size (from 0 to INT_MAX)
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

H.263p encoder AVOptions:
-umv (int) E..V.. Use unlimited motion vectors. (from 0 to 1)
-aiv (int) E..V.. Use alternative inter VLC. (from 0 to 1)
-obmc (int) E..V.. use overlapped block motion compensation. (from 0 to 1)
-structured_slices (int) E..V.. Write slice start position at every GOB header instead of just GOB number. (from 0 to 1)
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

H264 Decoder AVOptions:

MJPEG decoder AVOptions:
-extern_huff (int) .D.V.. Use external huffman table. (from 0 to 1)

mpeg1video encoder AVOptions:
-gop_timecode (string) E..V.. MPEG GOP Timecode in hh:mm:ss[:;.]ff format
-intra_vlc (int) E..V.. Use MPEG-2 intra VLC table. (from 0 to 1)
-drop_frame_timecode (int) E..V.. Timecode is in drop frame format. (from 0 to 1)
-scan_offset (int) E..V.. Reserve space for SVCD scan offset user data. (from 0 to 1)
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

mpeg2video encoder AVOptions:
-gop_timecode (string) E..V.. MPEG GOP Timecode in hh:mm:ss[:;.]ff format
-intra_vlc (int) E..V.. Use MPEG-2 intra VLC table. (from 0 to 1)
-drop_frame_timecode (int) E..V.. Timecode is in drop frame format. (from 0 to 1)
-scan_offset (int) E..V.. Reserve space for SVCD scan offset user data. (from 0 to 1)
-non_linear_quant (int) E..V.. Use nonlinear quantizer. (from 0 to 1)
-alternate_scan (int) E..V.. Enable alternate scantable. (from 0 to 1)
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

MPEG4 encoder AVOptions:
-data_partitioning (int) E..V.. Use data partitioning. (from 0 to 1)
-alternate_scan (int) E..V.. Enable alternate scantable. (from 0 to 1)
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

MPEG4 Video Decoder AVOptions:

msmpeg4v2 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

msmpeg4v3 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

ProRes encoder AVOptions:
-mbs_per_slice (int) E..V.. macroblocks per slice (from 1 to 8)
-profile (int) E..V.. (from 0 to 3)
proxy E..V..
lt E..V..
standard E..V..
hq E..V..
-vendor (string) E..V.. vendor ID
-bits_per_mb (int) E..V.. desired bits per macroblock (from 0 to 8192)
-quant_mat (int) E..V.. quantiser matrix (from -1 to 4)
auto E..V..
proxy E..V..
lt E..V..
standard E..V..
hq E..V..
default E..V..

rawdec AVOptions:
-top (int) .D.V.. top field first (from -1 to 1)

rv10 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

rv20 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

snow encoder AVOptions:
-memc_only (int) E..V.. Only do ME/MC (I frames -) ref, P frame -) ME+MC). (from 0 to 1)
-no_bitstream (int) E..V.. Skip final bitstream writeout. (from 0 to 1)

TIFF encoder AVOptions:
-dpi (int) E..V.. set the image resolution (in dpi) (from 1 to 65536)
-compression_algo (int) E..V.. (from 1 to 32946)
packbits E..V..
raw E..V..
lzw E..V..
deflate E..V..

V210 Decoder AVOptions:
-custom_stride (int) .D.V.. Custom V210 stride (from INT_MIN to INT_MAX)

wmv1 encoder AVOptions:
-mpv_flags (flags) E..V.. Flags common for all mpegvideo-based encoders.
skip_rd E..V.. RD optimal MB level residual skipping
strict_gop E..V.. Strictly enforce gop size
qp_rd E..V.. Use rate distortion optimization for qp selection
cbp_rd E..V.. use rate distortion optimization for CBP
-luma_elim_threshold (int) E..V.. single coefficient elimination threshold for luminance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-chroma_elim_threshold (int) E..V.. single coefficient elimination threshold for chrominance (negative values also consider dc coefficient) (from INT_MIN to INT_MAX)
-quantizer_noise_shaping (int) E..V.. (from 0 to INT_MAX)

AAC encoder AVOptions:
-stereo_mode (int) E...A. Stereo coding method (from -1 to 1)
auto E...A. Selected by the Encoder
ms_off E...A. Disable Mid/Side coding
ms_force E...A. Force Mid/Side for the whole frame if possible
-aac_coder (int) E...A. (from 0 to 3)

AAC decoder AVOptions:
-dual_mono_mode (int) .D..A. Select the channel to decode for dual mono (from -1 to 2)
auto .D..A. autoselection
main .D..A. Select Main/Left channel
sub .D..A. Select Sub/Right channel
both .D..A. Select both channels

AC-3 Encoder AVOptions:
-per_frame_metadata (int) E...A. Allow Changing Metadata Per-Frame (from 0 to 1)
-center_mixlev (float) E...A. Center Mix Level (from 0 to 1)
-surround_mixlev (float) E...A. Surround Mix Level (from 0 to 1)
-mixing_level (int) E...A. Mixing Level (from -1 to 111)
-room_type (int) E...A. Room Type (from -1 to 2)
notindicated E...A. Not Indicated (default)
large E...A. Large Room
small E...A. Small Room
-copyright (int) E...A. Copyright Bit (from -1 to 1)
-dialnorm (int) E...A. Dialogue Level (dB) (from -31 to -1)
-dsur_mode (int) E...A. Dolby Surround Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround Encoded
off E...A. Not Dolby Surround Encoded
-original (int) E...A. Original Bit Stream (from -1 to 1)
-dmix_mode (int) E...A. Preferred Stereo Downmix Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
ltrt E...A. Lt/Rt Downmix Preferred
loro E...A. Lo/Ro Downmix Preferred
-ltrt_cmixlev (float) E...A. Lt/Rt Center Mix Level (from -1 to 2)
-ltrt_surmixlev (float) E...A. Lt/Rt Surround Mix Level (from -1 to 2)
-loro_cmixlev (float) E...A. Lo/Ro Center Mix Level (from -1 to 2)
-loro_surmixlev (float) E...A. Lo/Ro Surround Mix Level (from -1 to 2)
-dsurex_mode (int) E...A. Dolby Surround EX Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround EX Encoded
off E...A. Not Dolby Surround EX Encoded
-dheadphone_mode (int) E...A. Dolby Headphone Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Headphone Encoded
off E...A. Not Dolby Headphone Encoded
-ad_conv_type (int) E...A. A/D Converter Type (from -1 to 1)
standard E...A. Standard (default)
hdcd E...A. HDCD
-stereo_rematrixing (int) E...A. Stereo Rematrixing (from 0 to 1)
-channel_coupling (int) E...A. Channel Coupling (from -1 to 1)
auto E...A. Selected by the Encoder
-cpl_start_band (int) E...A. Coupling Start Band (from -1 to 15)
auto E...A. Selected by the Encoder

AC3 decoder AVOptions:
-drc_scale (float) .D..A. percentage of dynamic range compression to apply (from 0 to 1)

Fixed-Point AC-3 Encoder AVOptions:
-per_frame_metadata (int) E...A. Allow Changing Metadata Per-Frame (from 0 to 1)
-center_mixlev (float) E...A. Center Mix Level (from 0 to 1)
-surround_mixlev (float) E...A. Surround Mix Level (from 0 to 1)
-mixing_level (int) E...A. Mixing Level (from -1 to 111)
-room_type (int) E...A. Room Type (from -1 to 2)
notindicated E...A. Not Indicated (default)
large E...A. Large Room
small E...A. Small Room
-copyright (int) E...A. Copyright Bit (from -1 to 1)
-dialnorm (int) E...A. Dialogue Level (dB) (from -31 to -1)
-dsur_mode (int) E...A. Dolby Surround Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround Encoded
off E...A. Not Dolby Surround Encoded
-original (int) E...A. Original Bit Stream (from -1 to 1)
-dmix_mode (int) E...A. Preferred Stereo Downmix Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
ltrt E...A. Lt/Rt Downmix Preferred
loro E...A. Lo/Ro Downmix Preferred
-ltrt_cmixlev (float) E...A. Lt/Rt Center Mix Level (from -1 to 2)
-ltrt_surmixlev (float) E...A. Lt/Rt Surround Mix Level (from -1 to 2)
-loro_cmixlev (float) E...A. Lo/Ro Center Mix Level (from -1 to 2)
-loro_surmixlev (float) E...A. Lo/Ro Surround Mix Level (from -1 to 2)
-dsurex_mode (int) E...A. Dolby Surround EX Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround EX Encoded
off E...A. Not Dolby Surround EX Encoded
-dheadphone_mode (int) E...A. Dolby Headphone Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Headphone Encoded
off E...A. Not Dolby Headphone Encoded
-ad_conv_type (int) E...A. A/D Converter Type (from -1 to 1)
standard E...A. Standard (default)
hdcd E...A. HDCD
-stereo_rematrixing (int) E...A. Stereo Rematrixing (from 0 to 1)
-channel_coupling (int) E...A. Channel Coupling (from -1 to 1)
auto E...A. Selected by the Encoder
-cpl_start_band (int) E...A. Coupling Start Band (from -1 to 15)
auto E...A. Selected by the Encoder

APE decoder AVOptions:
-max_samples (int) .D..A. maximum number of samples decoded per call (from 1 to INT_MAX)
all .D..A. no maximum. decode all samples for each packet at once

E-AC-3 Encoder AVOptions:
-per_frame_metadata (int) E...A. Allow Changing Metadata Per-Frame (from 0 to 1)
-mixing_level (int) E...A. Mixing Level (from -1 to 111)
-room_type (int) E...A. Room Type (from -1 to 2)
notindicated E...A. Not Indicated (default)
large E...A. Large Room
small E...A. Small Room
-copyright (int) E...A. Copyright Bit (from -1 to 1)
-dialnorm (int) E...A. Dialogue Level (dB) (from -31 to -1)
-dsur_mode (int) E...A. Dolby Surround Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround Encoded
off E...A. Not Dolby Surround Encoded
-original (int) E...A. Original Bit Stream (from -1 to 1)
-dmix_mode (int) E...A. Preferred Stereo Downmix Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
ltrt E...A. Lt/Rt Downmix Preferred
loro E...A. Lo/Ro Downmix Preferred
-ltrt_cmixlev (float) E...A. Lt/Rt Center Mix Level (from -1 to 2)
-ltrt_surmixlev (float) E...A. Lt/Rt Surround Mix Level (from -1 to 2)
-loro_cmixlev (float) E...A. Lo/Ro Center Mix Level (from -1 to 2)
-loro_surmixlev (float) E...A. Lo/Ro Surround Mix Level (from -1 to 2)
-dsurex_mode (int) E...A. Dolby Surround EX Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Surround EX Encoded
off E...A. Not Dolby Surround EX Encoded
-dheadphone_mode (int) E...A. Dolby Headphone Mode (from -1 to 2)
notindicated E...A. Not Indicated (default)
on E...A. Dolby Headphone Encoded
off E...A. Not Dolby Headphone Encoded
-ad_conv_type (int) E...A. A/D Converter Type (from -1 to 1)
standard E...A. Standard (default)
hdcd E...A. HDCD
-stereo_rematrixing (int) E...A. Stereo Rematrixing (from 0 to 1)
-channel_coupling (int) E...A. Channel Coupling (from -1 to 1)
auto E...A. Selected by the Encoder
-cpl_start_band (int) E...A. Coupling Start Band (from -1 to 15)
auto E...A. Selected by the Encoder

E-AC3 decoder AVOptions:
-drc_scale (float) .D..A. percentage of dynamic range compression to apply (from 0 to 1)

FLAC encoder AVOptions:
-lpc_coeff_precision (int) E...A. LPC coefficient precision (from 0 to 15)
-lpc_type (int) E...A. LPC algorithm (from -1 to 3)
none E...A.
fixed E...A.
levinson E...A.
cholesky E...A.
-lpc_passes (int) E...A. Number of passes to use for Cholesky factorization during LPC analysis (from 1 to INT_MAX)
-min_partition_order (int) E...A. (from -1 to 8)
-max_partition_order (int) E...A. (from -1 to 8)
-prediction_order_method (int) E...A. Search method for selecting prediction order (from -1 to 5)
estimation E...A.
2level E...A.
4level E...A.
8level E...A.
search E...A.
log E...A.
-ch_mode (int) E...A. Stereo decorrelation mode (from -1 to 3)
auto E...A.
indep E...A.
left_side E...A.
right_side E...A.
mid_side E...A.

G.723.1 decoder AVOptions:
-postfilter (int) .D..A. postfilter on/off (from 0 to 1)

TTA Decoder AVOptions:
-password (string) .D..A. Set decoding password

g722 decoder AVOptions:
-bits_per_codeword (flags) .D..A. Bits per G722 codeword

g726 AVOptions:
-code_size (int) E...A. Bits per code (from 2 to 5)

dvdsubdec AVOptions:
-palette (string) .D...S set the global palette

PGS subtitle decoder AVOptions:
-forced_subs_only (int) .D...S Only show forced subtitles (from 0 to 1)

pjs decoder AVOptions:
-keep_ass_markup (int) .D...S Set if ASS tags must be escaped (from 0 to 1)

subviewer1 decoder AVOptions:
-keep_ass_markup (int) .D...S Set if ASS tags must be escaped (from 0 to 1)

text decoder AVOptions:
-keep_ass_markup (int) .D...S Set if ASS tags must be escaped (from 0 to 1)

vplayer decoder AVOptions:
-keep_ass_markup (int) .D...S Set if ASS tags must be escaped (from 0 to 1)

libmp3lame encoder AVOptions:
-reservoir (int) E...A. Use bit reservoir. (from 0 to 1)

libopencore_amrnb AVOptions:
-dtx (int) E...A. Allow DTX (generate comfort noise) (from 0 to 1)

libopus AVOptions:
-application (int) E...A. Intended application type (from 2048 to 2051)
voip E...A. Favor improved speech intelligibility
audio E...A. Favor faithfulness to the input
lowdelay E...A. Restrict to only the lowest delay modes
-frame_duration (float) E...A. Duration of a frame in milliseconds (from 2.5 to 60)
-packet_loss (int) E...A. Expected packet loss percentage (from 0 to 100)
-vbr (int) E...A. Variable bit rate mode (from 0 to 2)
off E...A. Use constant bit rate
on E...A. Use variable bit rate
constrained E...A. Use constrained VBR

libspeex AVOptions:
-abr (int) E...A. Use average bit rate (from 0 to 1)
-cbr_quality (int) E...A. Set quality value (0 to 10) for CBR (from 0 to 10)
-frames_per_packet (int) E...A. Number of frames to encode in each packet (from 1 to 8)
-vad (int) E...A. Voice Activity Detection (from 0 to 1)
-dtx (int) E...A. Discontinuous Transmission (from 0 to 1)

libvo_amrwbenc AVOptions:
-dtx (int) E...A. Allow DTX (generate comfort noise) (from 0 to 1)

libvorbis AVOptions:
-iblock (double) E...A. Sets the impulse block bias (from -15 to 0)

libvpx encoder AVOptions:
-cpu-used (int) E..V.. Quality/Speed ratio modifier (from INT_MIN to INT_MAX)
-auto-alt-ref (int) E..V.. Enable use of alternate reference frames (2-pass only) (from -1 to 1)
-lag-in-frames (int) E..V.. Number of frames to look ahead for alternate reference frame selection (from -1 to INT_MAX)
-arnr-maxframes (int) E..V.. altref noise reduction max frame count (from -1 to INT_MAX)
-arnr-strength (int) E..V.. altref noise reduction filter strength (from -1 to INT_MAX)
-arnr-type (int) E..V.. altref noise reduction filter type (from -1 to INT_MAX)
backward E..V..
forward E..V..
centered E..V..
-deadline (int) E..V.. Time to spend encoding, in microseconds. (from INT_MIN to INT_MAX)
best E..V..
good E..V..
realtime E..V..
-error-resilient (flags) E..V.. Error resilience configuration
default E..V.. Improve resiliency against losses of whole frames
partitions E..V.. The frame partitions are independently decodable by the bool decoder, meaning that partitions can be decoded even though earlier partitions have been lost. Note that intra predicition is still done over the partition boundary.
-max-intra-rate (int) E..V.. Maximum I-frame bitrate (pct) 0=unlimited (from -1 to INT_MAX)
-speed (int) E..V.. (from -16 to 16)
-quality (int) E..V.. (from INT_MIN to INT_MAX)
best E..V..
good E..V..
realtime E..V..
-vp8flags (flags) E..V..
error_resilient E..V.. enable error resilience
altref E..V.. enable use of alternate reference frames (VP8/2-pass only)
-arnr_max_frames (int) E..V.. altref noise reduction max frame count (from 0 to 15)
-arnr_strength (int) E..V.. altref noise reduction filter strength (from 0 to 6)
-arnr_type (int) E..V.. altref noise reduction filter type (from 1 to 3)
-rc_lookahead (int) E..V.. Number of frames to look ahead for alternate reference frame selection (from 0 to 25)
-crf (int) E..V.. Select the quality for constant quality mode (from 0 to 63)

libx264 AVOptions:
-preset (string) E..V.. Set the encoding preset (cf. x264 --fullhelp)
-tune (string) E..V.. Tune the encoding params (cf. x264 --fullhelp)
-profile (string) E..V.. Set profile restrictions (cf. x264 --fullhelp)
-fastfirstpass (int) E..V.. Use fast settings when encoding first pass (from 0 to 1)
-level (string) E..V.. Specify level (as defined by Annex A)
-passlogfile (string) E..V.. Filename for 2 pass stats
-wpredp (string) E..V.. Weighted prediction for P-frames
-x264opts (string) E..V.. x264 options
-crf (float) E..V.. Select the quality for constant quality mode (from -1 to FLT_MAX)
-crf_max (float) E..V.. In CRF mode, prevents VBV from lowering quality beyond this point. (from -1 to FLT_MAX)
-qp (int) E..V.. Constant quantization parameter rate control method (from -1 to INT_MAX)
-aq-mode (int) E..V.. AQ method (from -1 to INT_MAX)
none E..V..
variance E..V.. Variance AQ (complexity mask)
autovariance E..V.. Auto-variance AQ (experimental)
-aq-strength (float) E..V.. AQ strength. Reduces blocking and blurring in flat and textured areas. (from -1 to FLT_MAX)
-psy (int) E..V.. Use psychovisual optimizations. (from -1 to 1)
-psy-rd (string) E..V.. Strength of psychovisual optimization, in (psy-rd):(psy-trellis) format.
-rc-lookahead (int) E..V.. Number of frames to look ahead for frametype and ratecontrol (from -1 to INT_MAX)
-weightb (int) E..V.. Weighted prediction for B-frames. (from -1 to 1)
-weightp (int) E..V.. Weighted prediction analysis method. (from -1 to INT_MAX)
none E..V..
simple E..V..
smart E..V..
-ssim (int) E..V.. Calculate and print SSIM stats. (from -1 to 1)
-intra-refresh (int) E..V.. Use Periodic Intra Refresh instead of IDR frames. (from -1 to 1)
-b-bias (int) E..V.. Influences how often B-frames are used (from INT_MIN to INT_MAX)
-b-pyramid (int) E..V.. Keep some B-frames as references. (from -1 to INT_MAX)
none E..V..
strict E..V.. Strictly hierarchical pyramid
normal E..V.. Non-strict (not Blu-ray compatible)
-mixed-refs (int) E..V.. One reference per partition, as opposed to one reference per macroblock (from -1 to 1)
-8x8dct (int) E..V.. High profile 8x8 transform. (from -1 to 1)
-fast-pskip (int) E..V.. (from -1 to 1)
-aud (int) E..V.. Use access unit delimiters. (from -1 to 1)
-mbtree (int) E..V.. Use macroblock tree ratecontrol. (from -1 to 1)
-deblock (string) E..V.. Loop filter parameters, in (alpha:beta) form.
-cplxblur (float) E..V.. Reduce fluctuations in QP (before curve compression) (from -1 to FLT_MAX)
-partitions (string) E..V.. A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all
-direct-pred (int) E..V.. Direct MV prediction mode (from -1 to INT_MAX)
none E..V..
spatial E..V..
temporal E..V..
auto E..V..
-slice-max-size (int) E..V.. Limit the size of each slice in bytes (from -1 to INT_MAX)
-stats (string) E..V.. Filename for 2 pass stats
-nal-hrd (int) E..V.. Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) (from -1 to INT_MAX)
none E..V..
vbr E..V..
cbr E..V..
-x264-params (string) E..V.. Override the x264 configuration using a :-separated list of key=value parameters

libx264rgb AVOptions:
-preset (string) E..V.. Set the encoding preset (cf. x264 --fullhelp)
-tune (string) E..V.. Tune the encoding params (cf. x264 --fullhelp)
-profile (string) E..V.. Set profile restrictions (cf. x264 --fullhelp)
-fastfirstpass (int) E..V.. Use fast settings when encoding first pass (from 0 to 1)
-level (string) E..V.. Specify level (as defined by Annex A)
-passlogfile (string) E..V.. Filename for 2 pass stats
-wpredp (string) E..V.. Weighted prediction for P-frames
-x264opts (string) E..V.. x264 options
-crf (float) E..V.. Select the quality for constant quality mode (from -1 to FLT_MAX)
-crf_max (float) E..V.. In CRF mode, prevents VBV from lowering quality beyond this point. (from -1 to FLT_MAX)
-qp (int) E..V.. Constant quantization parameter rate control method (from -1 to INT_MAX)
-aq-mode (int) E..V.. AQ method (from -1 to INT_MAX)
none E..V..
variance E..V.. Variance AQ (complexity mask)
autovariance E..V.. Auto-variance AQ (experimental)
-aq-strength (float) E..V.. AQ strength. Reduces blocking and blurring in flat and textured areas. (from -1 to FLT_MAX)
-psy (int) E..V.. Use psychovisual optimizations. (from -1 to 1)
-psy-rd (string) E..V.. Strength of psychovisual optimization, in (psy-rd):(psy-trellis) format.
-rc-lookahead (int) E..V.. Number of frames to look ahead for frametype and ratecontrol (from -1 to INT_MAX)
-weightb (int) E..V.. Weighted prediction for B-frames. (from -1 to 1)
-weightp (int) E..V.. Weighted prediction analysis method. (from -1 to INT_MAX)
none E..V..
simple E..V..
smart E..V..
-ssim (int) E..V.. Calculate and print SSIM stats. (from -1 to 1)
-intra-refresh (int) E..V.. Use Periodic Intra Refresh instead of IDR frames. (from -1 to 1)
-b-bias (int) E..V.. Influences how often B-frames are used (from INT_MIN to INT_MAX)
-b-pyramid (int) E..V.. Keep some B-frames as references. (from -1 to INT_MAX)
none E..V..
strict E..V.. Strictly hierarchical pyramid
normal E..V.. Non-strict (not Blu-ray compatible)
-mixed-refs (int) E..V.. One reference per partition, as opposed to one reference per macroblock (from -1 to 1)
-8x8dct (int) E..V.. High profile 8x8 transform. (from -1 to 1)
-fast-pskip (int) E..V.. (from -1 to 1)
-aud (int) E..V.. Use access unit delimiters. (from -1 to 1)
-mbtree (int) E..V.. Use macroblock tree ratecontrol. (from -1 to 1)
-deblock (string) E..V.. Loop filter parameters, in (alpha:beta) form.
-cplxblur (float) E..V.. Reduce fluctuations in QP (before curve compression) (from -1 to FLT_MAX)
-partitions (string) E..V.. A comma-separated list of partitions to consider. Possible values: p8x8, p4x4, b8x8, i8x8, i4x4, none, all
-direct-pred (int) E..V.. Direct MV prediction mode (from -1 to INT_MAX)
none E..V..
spatial E..V..
temporal E..V..
auto E..V..
-slice-max-size (int) E..V.. Limit the size of each slice in bytes (from -1 to INT_MAX)
-stats (string) E..V.. Filename for 2 pass stats
-nal-hrd (int) E..V.. Signal HRD information (requires vbv-bufsize; cbr not allowed in .mp4) (from -1 to INT_MAX)
none E..V..
vbr E..V..
cbr E..V..
-x264-params (string) E..V.. Override the x264 configuration using a :-separated list of key=value parameters

libxavs AVOptions:
-crf (float) E..V.. Select the quality for constant quality mode (from -1 to FLT_MAX)
-qp (int) E..V.. Constant quantization parameter rate control method (from -1 to INT_MAX)
-b-bias (int) E..V.. Influences how often B-frames are used (from INT_MIN to INT_MAX)
-cplxblur (float) E..V.. Reduce fluctuations in QP (before curve compression) (from -1 to FLT_MAX)
-direct-pred (int) E..V.. Direct MV prediction mode (from -1 to INT_MAX)
none E..V..
spatial E..V..
temporal E..V..
auto E..V..
-aud (int) E..V.. Use access unit delimiters. (from -1 to 1)
-mbtree (int) E..V.. Use macroblock tree ratecontrol. (from -1 to 1)
-mixed-refs (int) E..V.. One reference per partition, as opposed to one reference per macroblock (from -1 to 1)
-fast-pskip (int) E..V.. (from -1 to 1)

AVFormatContext AVOptions:
-avioflags (flags) ED....
direct ED.... reduce buffering
-probesize (int) .D.... set probing size (from 32 to INT_MAX)
-packetsize (int) E..... set packet size (from 0 to INT_MAX)
-fflags (flags) ED....
ignidx .D.... ignore index
genpts .D.... generate pts
nofillin .D.... do not fill in missing values that can be exactly calculated
noparse .D.... disable AVParsers, this needs nofillin too
igndts .D.... ignore dts
discardcorrupt .D.... discard corrupted frames
sortdts .D.... try to interleave outputted packets by dts
keepside .D.... dont merge side data
latm E..... enable RTP MP4A-LATM payload
nobuffer .D.... reduce the latency introduced by optional buffering
-seek2any (int) .D.... forces seeking to enable seek to any mode (from 0 to 1)
-analyzeduration (int) .D.... specify how many microseconds are analyzed to probe the input (from 0 to INT_MAX)
-cryptokey (binary) .D.... decryption key
-indexmem (int) .D.... max memory used for timestamp index (per stream) (from 0 to INT_MAX)
-rtbufsize (int) .D.... max memory used for buffering real-time frames (from 0 to INT_MAX)
-fdebug (flags) ED.... print specific debug info
ts ED....
-max_delay (int) ED.... maximum muxing or demuxing delay in microseconds (from -1 to INT_MAX)
-fpsprobesize (int) .D.... number of frames used to probe fps (from -1 to 2.14748e+09)
-audio_preload (int) E..... microseconds by which audio packets should be interleaved earlier (from 0 to 2.14748e+09)
-chunk_duration (int) E..... microseconds for each chunk (from 0 to 2.14748e+09)
-chunk_size (int) E..... size in bytes for each chunk (from 0 to 2.14748e+09)
-f_err_detect (flags) .D.... set error detection flags (deprecated; use err_detect, save via avconv)
crccheck .D.... verify embedded CRCs
bitstream .D.... detect bitstream specification deviations
buffer .D.... detect improper bitstream length
explode .D.... abort decoding on minor error detection
careful .D.... consider things that violate the spec and have not been seen in the wild as errors
compliant .D.... consider all spec non compliancies as errors
aggressive .D.... consider things that a sane encoder shouldnt do as an error
-err_detect (flags) .D.... set error detection flags
crccheck .D.... verify embedded CRCs
bitstream .D.... detect bitstream specification deviations
buffer .D.... detect improper bitstream length
explode .D.... abort decoding on minor error detection
careful .D.... consider things that violate the spec and have not been seen in the wild as errors
compliant .D.... consider all spec non compliancies as errors
aggressive .D.... consider things that a sane encoder shouldnt do as an error
-use_wallclock_as_timestamps (int) .D.... use wallclock as timestamps (from 0 to 2.14748e+09)
-avoid_negative_ts (int) E..... shift timestamps to make them positive. 1 enables, 0 disables, default of -1 enables when required by target format. (from -1 to 1)
-skip_initial_bytes (int) .D.... skip initial bytes (from 0 to 2.14748e+09)
-correct_ts_overflow (int) .D.... correct single timestamp overflows (from 0 to 1)

AVIOContext AVOptions:

URLContext AVOptions:

crypto AVOptions:
-key (binary) .D.... AES decryption key
-iv (binary) .D.... AES decryption initialization vector

ffrtmphttp AVOptions:
-ffrtmphttp_tls (int) .D.... Use a HTTPS tunneling connection (RTMPTS). (from 0 to 1)

file AVOptions:
-truncate (int) E..... Truncate existing files on write (from 0 to 1)

http AVOptions:
-seekable (int) .D.... control seekability of connection (from -1 to 1)
-chunked_post (int) E..... use chunked transfer-encoding for posts (from 0 to 1)
-headers (string) ED.... set custom HTTP headers, can override built in default headers
-content_type (string) ED.... force a content type
-user-agent (string) .D.... override User-Agent header
-multiple_requests (int) ED.... use persistent connections (from 0 to 1)
-post_data (binary) ED.... set custom HTTP post data
-timeout (int) ED.... set timeout of socket I/O operations (from -1 to INT_MAX)

rtmp AVOptions:
-rtmp_app (string) ED.... Name of application to connect to on the RTMP server
-rtmp_buffer (int) ED.... Set buffer time in milliseconds. The default is 3000. (from 0 to INT_MAX)
-rtmp_conn (string) ED.... Append arbitrary AMF data to the Connect message
-rtmp_flashver (string) ED.... Version of the Flash plugin used to run the SWF player.
-rtmp_flush_interval (int) E..... Number of packets flushed in the same request (RTMPT only). (from 0 to INT_MAX)
-rtmp_live (int) .D.... Specify that the media is a live stream. (from INT_MIN to INT_MAX)
any .D.... both
live .D.... live stream
recorded .D.... recorded stream
-rtmp_pageurl (string) .D.... URL of the web page in which the media was embedded. By default no value will be sent.
-rtmp_playpath (string) ED.... Stream identifier to play or to publish
-rtmp_subscribe (string) .D.... Name of live stream to subscribe to. Defaults to rtmp_playpath.
-rtmp_swfhash (binary) .D.... SHA256 hash of the decompressed SWF file (32 bytes).
-rtmp_swfsize (int) .D.... Size of the decompressed SWF file, required for SWFVerification. (from 0 to INT_MAX)
-rtmp_swfurl (string) ED.... URL of the SWF player. By default no value will be sent
-rtmp_swfverify (string) .D.... URL to player swf file, compute hash/size automatically.
-rtmp_tcurl (string) ED.... URL of the target stream. Defaults to proto://host[:port]/app.
-rtmp_listen (int) .D.... Listen for incoming rtmp connections (from INT_MIN to INT_MAX)
-timeout (int) .D.... Maximum timeout (in seconds) to wait for incoming connections. -1 is infinite. Implies -rtmp_listen 1 (from INT_MIN to INT_MAX)

rtmpt AVOptions:
-rtmp_app (string) ED.... Name of application to connect to on the RTMP server
-rtmp_buffer (int) ED.... Set buffer time in milliseconds. The default is 3000. (from 0 to INT_MAX)
-rtmp_conn (string) ED.... Append arbitrary AMF data to the Connect message
-rtmp_flashver (string) ED.... Version of the Flash plugin used to run the SWF player.
-rtmp_flush_interval (int) E..... Number of packets flushed in the same request (RTMPT only). (from 0 to INT_MAX)
-rtmp_live (int) .D.... Specify that the media is a live stream. (from INT_MIN to INT_MAX)
any .D.... both
live .D.... live stream
recorded .D.... recorded stream
-rtmp_pageurl (string) .D.... URL of the web page in which the media was embedded. By default no value will be sent.
-rtmp_playpath (string) ED.... Stream identifier to play or to publish
-rtmp_subscribe (string) .D.... Name of live stream to subscribe to. Defaults to rtmp_playpath.
-rtmp_swfhash (binary) .D.... SHA256 hash of the decompressed SWF file (32 bytes).
-rtmp_swfsize (int) .D.... Size of the decompressed SWF file, required for SWFVerification. (from 0 to INT_MAX)
-rtmp_swfurl (string) ED.... URL of the SWF player. By default no value will be sent
-rtmp_swfverify (string) .D.... URL to player swf file, compute hash/size automatically.
-rtmp_tcurl (string) ED.... URL of the target stream. Defaults to proto://host[:port]/app.
-rtmp_listen (int) .D.... Listen for incoming rtmp connections (from INT_MIN to INT_MAX)
-timeout (int) .D.... Maximum timeout (in seconds) to wait for incoming connections. -1 is infinite. Implies -rtmp_listen 1 (from INT_MIN to INT_MAX)

srtp AVOptions:
-srtp_out_suite (string) E.....
-srtp_out_params (string) E.....
-srtp_in_suite (string) E.....
-srtp_in_params (string) E.....

tcp AVOptions:
-listen (int) ED.... listen on port instead of connecting (from 0 to 1)
-timeout (int) ED.... timeout of socket i/o operations (from 0 to INT_MAX)
-listen_timeout (int) ED.... connection awaiting timeout (from -1 to INT_MAX)

udp AVOptions:
-buffer_size (int) ED.... Socket buffer size in bytes (from 0 to INT_MAX)
-localport (int) ED.... Set local port to bind to (from 0 to INT_MAX)
-localaddr (string) ED.... Choose local IP address
-pkt_size (int) ED.... Set size of UDP packets (from 0 to INT_MAX)
-reuse (int) ED.... Explicitly allow or disallow reusing UDP sockets (from 0 to 1)
-ttl (int) E..... Set the time to live value (for multicast only) (from 0 to INT_MAX)
-connect (int) ED.... Should connect() be called on socket (from 0 to 1)
-fifo_size (int) .D.... Set the UDP receiving circular buffer size, expressed as a number of packets with size of 188 bytes (from 0 to INT_MAX)
-overrun_nonfatal (int) .D.... Survive in case of UDP receiving circular buffer overrun (from 0 to 1)
-timeout (int) .D.... In read mode: if no data arrived in more than this time interval, raise error (from 0 to INT_MAX)

lavfi indev AVOptions:
-graph (string) .D.... set libavfilter graph
-graph_file (string) .D.... set libavfilter graph filename
-dumpgraph (string) .D.... dump graph to stderr

Artworx Data Format demuxer AVOptions:
-linespeed (int) .D.... set simulated line speed (bytes per second) (from 1 to INT_MAX)
-video_size (string) .D.... set video size, such as 640x480 or hd720.
-framerate (string) .D.... set framerate (frames per second)

aqtdec AVOptions:
-subfps (rational) .D...S set the movie frame rate (from 0 to INT_MAX)

asf demuxer AVOptions:
-no_resync_search (int) .D.... Don't try to resynchronize by looking for a certain optional start code (from 0 to 1)

avi AVOptions:
-use_odml (int) .D.... use odml index (from -1 to 1)

Binary text demuxer AVOptions:
-linespeed (int) .D.... set simulated line speed (bytes per second) (from 1 to INT_MAX)
-video_size (string) .D.... set video size, such as 640x480 or hd720.
-framerate (string) .D.... set framerate (frames per second)

cavsvideo demuxer AVOptions:
-framerate (string) .D....

CDXL demuxer AVOptions:
-sample_rate (int) .D.... (from 1 to INT_MAX)
-framerate (string) .D....

concat demuxer AVOptions:
-safe (int) .D.... enable safe mode (from -1 to 1)

dirac demuxer AVOptions:
-framerate (string) .D....

dnxhd demuxer AVOptions:
-framerate (string) .D....

flvdec AVOptions:
-flv_metadata (int) .D.V.. Allocate streams according the onMetaData array (from 0 to 1)

g729 demuxer AVOptions:
-bit_rate (int) .D.... (from 0 to INT_MAX)

GIF demuxer AVOptions:
-min_delay (int) .D.... minimum valid delay between frames (in hundredths of second) (from 0 to 6000)
-default_delay (int) .D.... default delay between frames (in hundredths of second) (from 0 to 6000)

gsm demuxer AVOptions:
-sample_rate (int) .D.... (from 1 to 6.50753e+07)

h261 demuxer AVOptions:
-framerate (string) .D....

h263 demuxer AVOptions:
-framerate (string) .D....

h264 demuxer AVOptions:
-framerate (string) .D....

iCE Draw File demuxer AVOptions:
-linespeed (int) .D.... set simulated line speed (bytes per second) (from 1 to INT_MAX)
-video_size (string) .D.... set video size, such as 640x480 or hd720.
-framerate (string) .D.... set framerate (frames per second)

image2 demuxer AVOptions:
-framerate (string) .D.... set the video framerate
-loop (int) .D.... force loop over input file sequence (from 0 to 1)
-pattern_type (int) .D.... set pattern type (from 0 to INT_MAX)
glob_sequence .D.... select glob/sequence pattern type
glob .D.... select glob pattern type
sequence .D.... select sequence pattern type
-pixel_format (string) .D.... set video pixel format
-start_number (int) .D.... set first number in the sequence (from 0 to INT_MAX)
-start_number_range (int) .D.... set range for looking at the first sequence number (from 1 to INT_MAX)
-video_size (string) .D.... set video size
-frame_size (int) .D.... force frame size in bytes (from 0 to INT_MAX)

image2pipe demuxer AVOptions:
-framerate (string) .D.... set the video framerate
-loop (int) .D.... force loop over input file sequence (from 0 to 1)
-pattern_type (int) .D.... set pattern type (from 0 to INT_MA(intX)
glob_sequence .D.... select glob/sequence pattern type
glob .D.... select glob pattern type
sequence .D.... select sequence pattern type
-pixel_format (string) .D.... set video pixel format
-start_number (int) .D.... set first number in the sequence (from 0 to INT_MAX)
-start_number_range (int) .D.... set range for looking at the first sequence number (from 1 to INT_MAX)
-video_size (string) .D.... set video size
-frame_size (int) .D.... force frame size in bytes (from 0 to INT_MAX)

ingenient demuxer AVOptions:
-framerate (string) .D....

m4v demuxer AVOptions:
-framerate (string) .D....

mjpeg demuxer AVOptions:
-framerate (string) .D....

mov,mp4,m4a,3gp,3g2,mj2 AVOptions:
-use_absolute_path (int) .D.V.. allow using absolute path when opening alias, this is a possible security issue (from 0 to 1)
-ignore_editlist (int) .D.V.. (from 0 to 1)

mpegtsraw demuxer AVOptions:
-compute_pcr (int) .D.... Compute exact PCR for each transport stream packet. (from 0 to 1)

mpegvideo demuxer AVOptions:
-framerate (string) .D....

alaw demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

mulaw demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

f64be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

f64le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

f32be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

f32le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s32be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s32le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s24be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s24le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s16be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s16le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

s8 demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u32be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u32le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u24be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u24le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u16be demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u16le demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

u8 demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-channels (int) .D.... (from 0 to INT_MAX)

rawvideo demuxer AVOptions:
-video_size (string) .D.... set frame size
-pixel_format (string) .D.... set pixel format
-framerate (string) .D.... set frame rate

RTP demuxer AVOptions:
-rtp_flags (flags) .D.... RTP flags
filter_src .D.... Only receive packets from the negotiated peer IP
listen .D.... Wait for incoming connections
-reorder_queue_size (int) .D.... Number of packets to buffer for handling of reordered packets (from -1 to INT_MAX)

RTSP demuxer AVOptions:
-initial_pause (int) .D.... Don't start playing the stream immediately (from 0 to 1)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-rtsp_transport (flags) ED.... RTSP transport protocols
udp ED.... UDP
tcp ED.... TCP
udp_multicast .D.... UDP multicast
http .D.... HTTP tunneling
-rtsp_flags (flags) .D.... RTSP flags
filter_src .D.... Only receive packets from the negotiated peer IP
listen .D.... Wait for incoming connections
-allowed_media_types (flags) .D.... Media types to accept from the server
video .D.... Video
audio .D.... Audio
data .D.... Data
-min_port (int) ED.... Minimum local UDP port (from 0 to 65535)
-max_port (int) ED.... Maximum local UDP port (from 0 to 65535)
-timeout (int) .D.... Maximum timeout (in seconds) to wait for incoming connections. -1 is infinite. Implies flag listen (from INT_MIN to INT_MAX)
-reorder_queue_size (int) .D.... Number of packets to buffer for handling of reordered packets (from -1 to INT_MAX)

sbg_demuxer AVOptions:
-sample_rate (int) .D.... (from 0 to INT_MAX)
-frame_size (int) .D.... (from 0 to INT_MAX)
-max_file_size (int) .D.... (from 0 to INT_MAX)

SDP demuxer AVOptions:
-sdp_flags (flags) .D.... SDP flags
filter_src .D.... Only receive packets from the negotiated peer IP
listen .D.... Wait for incoming connections
custom_io .D.... Use custom IO
-allowed_media_types (flags) .D.... Media types to accept from the server
video .D.... Video
audio .D.... Audio
data .D.... Data
-reorder_queue_size (int) .D.... Number of packets to buffer for handling of reordered packets (from -1 to INT_MAX)

tedcaptions_demuxer AVOptions:
-start_time (int64) .D...S set the start time (offset) of the subtitles, in ms (from I64_MIN to I64_MAX)

TTY demuxer AVOptions:
-chars_per_frame (int) .D.... (from 1 to INT_MAX)
-video_size (string) .D.... A string describing frame size, such as 640x480 or hd720.
-framerate (string) .D....

vc1 demuxer AVOptions:
-framerate (string) .D....

WAV demuxer AVOptions:
-ignore_length (int) .D.... Ignore length (from 0 to 1)

eXtended BINary text (XBIN) demuxer AVOptions:
-linespeed (int) .D.... set simulated line speed (bytes per second) (from 1 to INT_MAX)
-video_size (string) .D.... set video size, such as 640x480 or hd720.
-framerate (string) .D.... set framerate (frames per second)

AIFF muxer AVOptions:
-write_id3v2 (int) E..... Enable ID3 tags writing. (from 0 to 1)
-id3v2_version (int) E..... Select ID3v2 version to write. Currently 3 and 4 are supported. (from 3 to 4)

AST muxer AVOptions:
-loopstart (int64) E..... Loopstart position in milliseconds. (from -1 to INT_MAX)
-loopend (int64) E..... Loopend position in milliseconds. (from 0 to INT_MAX)

f4v muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

GIF muxer AVOptions:
-loop (int) E..... Number of times to loop the output. (from 0 to 65535)

hls muxer AVOptions:
-start_number (int64) E..... set first number in the sequence (from 0 to I64_MAX)
-hls_time (float) E..... set segment length in seconds (from 0 to FLT_MAX)
-hls_list_size (int) E..... set maximum number of playlist entries (from 0 to INT_MAX)
-hls_wrap (int) E..... set number after which the index wraps (from 0 to INT_MAX)

image2 muxer AVOptions:
-updatefirst (int) E..... update the first image file (from 0 to 1)
-start_number (int) E..... set first number in the sequence (from 1 to INT_MAX)

ipod muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

ismv muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

LATM/LOAS muxer AVOptions:
-smc-interval (int) E..... StreamMuxConfig interval. (from 1 to 65535)

mov muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

MP3 muxer AVOptions:
-id3v2_version (int) E..... Select ID3v2 version to write. Currently 3 and 4 are supported. (from 3 to 4)
-write_id3v1 (int) E..... Enable ID3v1 writing. ID3v1 tags are written in UTF-8 which may not be supported by most software. (from 0 to 1)

mp4 muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

mpeg muxer AVOptions:
-muxrate (int) E..... (from 0 to INT_MAX)
-preload (int) E..... Initial demux-decode delay in microseconds. (from 0 to INT_MAX)

vcd muxer AVOptions:
-muxrate (int) E..... (from 0 to INT_MAX)
-preload (int) E..... Initial demux-decode delay in microseconds. (from 0 to INT_MAX)

dvd muxer AVOptions:
-muxrate (int) E..... (from 0 to INT_MAX)
-preload (int) E..... Initial demux-decode delay in microseconds. (from 0 to INT_MAX)

svcd muxer AVOptions:
-muxrate (int) E..... (from 0 to INT_MAX)
-preload (int) E..... Initial demux-decode delay in microseconds. (from 0 to INT_MAX)

vob muxer AVOptions:
-muxrate (int) E..... (from 0 to INT_MAX)
-preload (int) E..... Initial demux-decode delay in microseconds. (from 0 to INT_MAX)

MPEGTS muxer AVOptions:
-mpegts_transport_stream_id (int) E..... Set transport_stream_id field. (from 1 to 65535)
-mpegts_original_network_id (int) E..... Set original_network_id field. (from 1 to 65535)
-mpegts_service_id (int) E..... Set service_id field. (from 1 to 65535)
-mpegts_pmt_start_pid (int) E..... Set the first pid of the PMT. (from 16 to 7936)
-mpegts_start_pid (int) E..... Set the first pid. (from 256 to 3840)
-mpegts_m2ts_mode (int) E..... Enable m2ts mode. (from -1 to 1)
-muxrate (int) E..... (from 0 to INT_MAX)
-pes_payload_size (int) E..... Minimum PES packet payload in bytes (from 0 to INT_MAX)
-mpegts_flags (flags) E..... MPEG-TS muxing flags
resend_headers E..... Reemit PAT/PMT before writing the next packet
latm E..... Use LATM packetization for AAC
-resend_headers (int) E..... Reemit PAT/PMT before writing the next packet (from 0 to INT_MAX)
-mpegts_copyts (int) E..... dont offset dts/pts (from -1 to 1)

Ogg muxer AVOptions:
-oggpagesize (int) E..... Set preferred Ogg page size. (from 0 to 65025)
-pagesize (int) E..... preferred page size in bytes (deprecated) (from 0 to 65025)
-page_duration (int) E..... preferred page duration, in microseconds (from 0 to I64_MAX)

psp muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

RTP muxer AVOptions:
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-payload_type (int) E..... Specify RTP payload type (from -1 to 127)
-ssrc (int) E..... Stream identifier (from INT_MIN to INT_MAX)
-cname (string) E..... CNAME to include in RTCP SR packets
-seq (int) E..... Starting sequence number (from -1 to 65535)

RTSP muxer AVOptions:
-initial_pause (int) .D.... Don't start playing the stream immediately (from 0 to 1)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-rtsp_transport (flags) ED.... RTSP transport protocols
udp ED.... UDP
tcp ED.... TCP
udp_multicast .D.... UDP multicast
http .D.... HTTP tunneling
-rtsp_flags (flags) .D.... RTSP flags
filter_src .D.... Only receive packets from the negotiated peer IP
listen .D.... Wait for incoming connections
-allowed_media_types (flags) .D.... Media types to accept from the server
video .D.... Video
audio .D.... Audio
data .D.... Data
-min_port (int) ED.... Minimum local UDP port (from 0 to 65535)
-max_port (int) ED.... Maximum local UDP port (from 0 to 65535)
-timeout (int) .D.... Maximum timeout (in seconds) to wait for incoming connections. -1 is infinite. Implies flag listen (from INT_MIN to INT_MAX)
-reorder_queue_size (int) .D.... Number of packets to buffer for handling of reordered packets (from -1 to INT_MAX)

segment muxer AVOptions:
-reference_stream (string) E..... set reference stream
-segment_format (string) E..... set container format used for the segments
-segment_list (string) E..... set the segment list filename
-segment_list_flags (flags) E..... set flags affecting segment list generation
cache E..... allow list caching
live E..... enable live-friendly list generation (useful for HLS)
-segment_list_size (int) E..... set the maximum number of playlist entries (from 0 to INT_MAX)
-segment_list_type (int) E..... set the segment list type (from -1 to 4)
flat E..... flat format
csv E..... csv format
ext E..... extended format
ffconcat E..... ffconcat format
m3u8 E..... M3U8 format
hls E..... Apple HTTP Live Streaming compatible
-segment_time (string) E..... set segment duration
-segment_time_delta (string) E..... set approximation value used for the segment times
-segment_times (string) E..... set segment split time points
-segment_frames (string) E..... set segment split frame numbers
-segment_wrap (int) E..... set number after which the index wraps (from 0 to INT_MAX)
-segment_start_number (int) E..... set the sequence number of the first segment (from 0 to INT_MAX)
-individual_header_trailer (int) E..... write header/trailer to each segment (from 0 to 1)
-write_header_trailer (int) E..... write a header to the first segment and a trailer to the last one (from 0 to 1)
-reset_timestamps (int) E..... reset timestamps at the begin of each segment (from 0 to 1)

stream_segment muxer AVOptions:
-reference_stream (string) E..... set reference stream
-segment_format (string) E..... set container format used for the segments
-segment_list (string) E..... set the segment list filename
-segment_list_flags (flags) E..... set flags affecting segment list generation
cache E..... allow list caching
live E..... enable live-friendly list generation (useful for HLS)
-segment_list_size (int) E..... set the maximum number of playlist entries (from 0 to INT_MAX)
-segment_list_type (int) E..... set the segment list type (from -1 to 4)
flat E..... flat format
csv E..... csv format
ext E..... extended format
ffconcat E..... ffconcat format
m3u8 E..... M3U8 format
hls E..... Apple HTTP Live Streaming compatible
-segment_time (string) E..... set segment duration
-segment_time_delta (string) E..... set approximation value used for the segment times
-segment_times (string) E..... set segment split time points
-segment_frames (string) E..... set segment split frame numbers
-segment_wrap (int) E..... set number after which the index wraps (from 0 to INT_MAX)
-segment_start_number (int) E..... set the sequence number of the first segment (from 0 to INT_MAX)
-individual_header_trailer (int) E..... write header/trailer to each segment (from 0 to 1)
-write_header_trailer (int) E..... write a header to the first segment and a trailer to the last one (from 0 to 1)
-reset_timestamps (int) E..... reset timestamps at the begin of each segment (from 0 to 1)

smooth streaming muxer AVOptions:
-window_size (int) E..... number of fragments kept in the manifest (from 0 to INT_MAX)
-extra_window_size (int) E..... number of fragments kept outside of the manifest before removing from disk (from 0 to INT_MAX)
-lookahead_count (int) E..... number of lookahead fragments (from 0 to INT_MAX)
-min_frag_duration (int64) E..... minimum fragment duration (in microseconds) (from 0 to INT_MAX)
-remove_at_exit (int) E..... remove all fragments when finished (from 0 to 1)

spdif AVOptions:
-spdif_flags (flags) E..... IEC 61937 encapsulation flags
be E..... output in big-endian format (for use as s16be)
-dtshd_rate (int) E..... mux complete DTS frames in HD mode at the specified IEC958 rate (in Hz, default 0=disabled) (from 0 to 768000)
-dtshd_fallback_time (int) E..... min secs to strip HD for after an overflow (-1: till the end, default 60) (from -1 to INT_MAX)

tg2 muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

tgp muxer AVOptions:
-movflags (flags) E..... MOV muxer flags
rtphint E..... Add RTP hint tracks
empty_moov E..... Make the initial moov atom empty (not supported by QuickTime)
frag_keyframe E..... Fragment at video keyframes
separate_moof E..... Write separate moof/mdat atoms for each track
frag_custom E..... Flush fragments on caller requests
isml E..... Create a live smooth streaming feed (for pushing to a publishing point)
faststart E..... Run a second pass to put the moov at the beginning of the file
-moov_size (int) E..... maximum moov size so it can be placed at the begin (from 0 to INT_MAX)
-rtpflags (flags) E..... RTP muxer flags
latm E..... Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC
rfc2190 E..... Use RFC 2190 packetization instead of RFC 4629 for H.263
skip_rtcp E..... Don't send RTCP sender reports
h264_mode0 E..... Use mode 0 for H264 in RTP
-skip_iods (int) E..... Skip writing iods atom. (from 0 to 1)
-iods_audio_profile (int) E..... iods audio profile atom. (from -1 to 255)
-iods_video_profile (int) E..... iods video profile atom. (from -1 to 255)
-frag_duration (int) E..... Maximum fragment duration (from 0 to INT_MAX)
-min_frag_duration (int) E..... Minimum fragment duration (from 0 to INT_MAX)
-frag_size (int) E..... Maximum fragment size (from 0 to INT_MAX)
-ism_lookahead (int) E..... Number of lookahead entries for ISM files (from 0 to INT_MAX)
-use_editlist (int) E..... use edit list (from -1 to 1)

WAV muxer AVOptions:
-write_bext (int) E..... Write BEXT chunk. (from 0 to 1)
-rf64 (int) E..... Use RF64 header rather than RIFF for large files. (from -1 to 1)
auto E..... Write RF64 header if file grows large enough.
always E..... Always write RF64 header regardless of file size.
never E..... Never write RF64 header regardless of file size.

SWScaler AVOptions:
-sws_flags (flags) E..V.. scaler flags
fast_bilinear E..V.. fast bilinear
bilinear E..V.. bilinear
bicubic E..V.. bicubic
experimental E..V.. experimental
neighbor E..V.. nearest neighbor
area E..V.. averaging area
bicublin E..V.. luma bicubic, chroma bilinear
gauss E..V.. gaussian
sinc E..V.. sinc
lanczos E..V.. lanczos
spline E..V.. natural bicubic spline
print_info E..V.. print info
accurate_rnd E..V.. accurate rounding
full_chroma_int E..V.. full chroma interpolation
full_chroma_inp E..V.. full chroma input
bitexact E..V..
error_diffusion E..V.. error diffusion dither
-srcw (int) E..V.. source width (from 1 to INT_MAX)
-srch (int) E..V.. source height (from 1 to INT_MAX)
-dstw (int) E..V.. destination width (from 1 to INT_MAX)
-dsth (int) E..V.. destination height (from 1 to INT_MAX)
-src_format (int) E..V.. source format (from 0 to 316)
-dst_format (int) E..V.. destination format (from 0 to 316)
-src_range (int) E..V.. source range (from 0 to 1)
-dst_range (int) E..V.. destination range (from 0 to 1)
-param0 (double) E..V.. scaler param 0 (from INT_MIN to INT_MAX)
-param1 (double) E..V.. scaler param 1 (from INT_MIN to INT_MAX)

SWResampler AVOptions:
-ich (int) ....A. set input channel count (from 0 to 32)
-in_channel_count (int) ....A. set input channel count (from 0 to 32)
-och (int) ....A. set output channel count (from 0 to 32)
-out_channel_count (int) ....A. set output channel count (from 0 to 32)
-uch (int) ....A. set used channel count (from 0 to 32)
-used_channel_count (int) ....A. set used channel count (from 0 to 32)
-isr (int) ....A. set input sample rate (from 0 to INT_MAX)
-in_sample_rate (int) ....A. set input sample rate (from 0 to INT_MAX)
-osr (int) ....A. set output sample rate (from 0 to INT_MAX)
-out_sample_rate (int) ....A. set output sample rate (from 0 to INT_MAX)
-isf (sample_fmt) ....A. set input sample format
-in_sample_fmt (sample_fmt) ....A. set input sample format
-osf (sample_fmt) ....A. set output sample format
-out_sample_fmt (sample_fmt) ....A. set output sample format
-tsf (sample_fmt) ....A. set internal sample format
-internal_sample_fmt (sample_fmt) ....A. set internal sample format
-icl (int64) ....A. set input channel layout (from 0 to I64_MAX)
-in_channel_layout (int64) ....A. set input channel layout (from 0 to I64_MAX)
-ocl (int64) ....A. set output channel layout (from 0 to I64_MAX)
-out_channel_layout (int64) ....A. set output channel layout (from 0 to I64_MAX)
-clev (float) ....A. set center mix level (from -32 to 32)
-center_mix_level (float) ....A. set center mix level (from -32 to 32)
-slev (float) ....A. set surround mix level (from -32 to 32)
-surround_mix_level (float) ....A. set surround mix Level (from -32 to 32)
-lfe_mix_level (float) ....A. set LFE mix level (from -32 to 32)
-rmvol (float) ....A. set rematrix volume (from -1000 to 1000)
-rematrix_volume (float) ....A. set rematrix volume (from -1000 to 1000)
-flags (flags) ....A. set flags
res ....A. force resampling
-swr_flags (flags) ....A. set flags
res ....A. force resampling
-dither_scale (float) ....A. set dither scale (from 0 to INT_MAX)
-dither_method (int) ....A. set dither method (from 0 to 71)
rectangular ....A. select rectangular dither
triangular ....A. select triangular dither
triangular_hp ....A. select triangular dither with high pass
lipshitz ....A. select lipshitz noise shaping dither
shibata ....A. select shibata noise shaping dither
low_shibata ....A. select low shibata noise shaping dither
high_shibata ....A. select high shibata noise shaping dither
f_weighted ....A. select f-weighted noise shaping dither
modified_e_weighted ....A. select modified-e-weighted noise shaping dither
improved_e_weighted ....A. select improved-e-weighted noise shaping dither
-filter_size (int) ....A. set swr resampling filter size (from 0 to INT_MAX)
-phase_shift (int) ....A. set swr resampling phase shift (from 0 to 24)
-linear_interp (int) ....A. enable linear interpolation (from 0 to 1)
-cutoff (double) ....A. set cutoff frequency ratio (from 0 to 1)
-resample_cutoff (double) ....A. set cutoff frequency ratio (from 0 to 1)
-resampler (int) ....A. set resampling Engine (from 0 to 1)
swr ....A. select SW Resampler
soxr ....A. select SoX Resampler
-precision (double) ....A. set soxr resampling precision (in bits) (from 15 to 33)
-cheby (int) ....A. enable soxr Chebyshev passband & higher-precision irrational ratio approximation (from 0 to 1)
-min_comp (float) ....A. set minimum difference between timestamps and audio data (in seconds) below which no timestamp compensation of either kind is applied (from 0 to FLT_MAX)
-min_hard_comp (float) ....A. set minimum difference between timestamps and audio data (in seconds) to trigger padding/trimming the data. (from 0 to INT_MAX)
-comp_duration (float) ....A. set duration (in seconds) over which data is stretched/squeezed to make it match the timestamps. (from 0 to INT_MAX)
-max_soft_comp (float) ....A. set maximum factor by which data is stretched/squeezed to make it match the timestamps. (from INT_MIN to INT_MAX)
-async (float) ....A. simplified 1 parameter audio timestamp matching, 0(disabled), 1(filling and trimming), )1(maximum stretch/squeeze in samples per second) (from INT_MIN to INT_MAX)
-first_pts (int64) ....A. Assume the first pts should be this value (in samples). (from I64_MIN to I64_MAX)
-matrix_encoding (int) ....A. set matrixed stereo encoding (from 0 to 2)
none ....A. select none
dolby ....A. select Dolby
dplii ....A. select Dolby Pro Logic II
-filter_type (int) ....A. select swr filter type (from 0 to 2)
cubic ....A. select cubic
blackman_nuttall ....A. select Blackman Nuttall Windowed Sinc
kaiser ....A. select Kaiser Windowed Sinc
-kaiser_beta (int) ....A. set swr Kaiser Window Beta (from 2 to 16)

afade AVOptions:
-type (int) ..F.A. set the fade direction (from 0 to 1)
in ..F.A.
out ..F.A.
-t (int) ..F.A. set the fade direction (from 0 to 1)
in ..F.A.
out ..F.A.
-start_sample (int64) ..F.A. set expression of sample to start fading (from 0 to I64_MAX)
-ss (int64) ..F.A. set expression of sample to start fading (from 0 to I64_MAX)
-nb_samples (int) ..F.A. set expression for fade duration in samples (from 1 to INT_MAX)
-ns (int) ..F.A. set expression for fade duration in samples (from 1 to INT_MAX)
-start_time (double) ..F.A. set expression of second to start fading (from 0 to 604800)
-st (double) ..F.A. set expression of second to start fading (from 0 to 604800)
-duration (double) ..F.A. set expression for fade duration in seconds (from 0 to 86400)
-d (double) ..F.A. set expression for fade duration in seconds (from 0 to 86400)
-curve (int) ..F.A. set expression for fade curve (from 0 to 9)
tri ..F.A. linear slope
qsin ..F.A. quarter of sine wave
esin ..F.A. exponential sine wave
hsin ..F.A. half of sine wave
log ..F.A. logarithmic
par ..F.A. inverted parabola
qua ..F.A. quadratic
cub ..F.A. cubic
squ ..F.A. square root
cbr ..F.A. cubic root
-c (int) ..F.A. set expression for fade curve (from 0 to 9)
tri ..F.A. linear slope
qsin ..F.A. quarter of sine wave
esin ..F.A. exponential sine wave
hsin ..F.A. half of sine wave
log ..F.A. logarithmic
par ..F.A. inverted parabola
qua ..F.A. quadratic
cub ..F.A. cubic
squ ..F.A. square root
cbr ..F.A. cubic root

aformat AVOptions:
-sample_fmts (string) ..F.A. A comma-separated list of sample formats.
-sample_rates (string) ..F.A. A comma-separated list of sample rates.
-channel_layouts (string) ..F.A. A comma-separated list of channel layouts.

allpass AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set filter-width (from 0 to 99999)
-w (double) ..F.A. set filter-width (from 0 to 99999)

amerge AVOptions:
-inputs (int) ..F.A. specify the number of inputs (from 2 to 32)

amix AVOptions:
-inputs (int) ..F.A. Number of inputs. (from 1 to 32)
-duration (int) ..F.A. How to determine the end-of-stream. (from 0 to 2)
longest ..F.A. Duration of longest input.
shortest ..F.A. Duration of shortest input.
first ..F.A. Duration of first input.
-dropout_transition (float) ..F.A. Transition time, in seconds, for volume renormalization when an input stream ends. (from 0 to INT_MAX)

apad AVOptions:
-packet_size (int) ..F.A. set silence packet size (from 0 to INT_MAX)
-pad_len (int64) ..F.A. number of samples of silence to add (from 0 to I64_MAX)
-whole_len (int64) ..F.A. target number of samples in the audio stream (from 0 to I64_MAX)

aselect AVOptions:
-expr (string) ..F... set selection expression
-e (string) ..F... set selection expression

asendcmd AVOptions:
-commands (string) ..F... set commands
-c (string) ..F... set commands
-filename (string) ..F... set commands file
-f (string) ..F... set commands file

asetnsamples AVOptions:
-pad (int) ..F.A. pad last frame with zeros (from 0 to 1)
-p (int) ..F.A. pad last frame with zeros (from 0 to 1)
-nb_out_samples (int) ..F.A. set the number of per-frame output samples (from 1 to INT_MAX)
-n (int) ..F.A. set the number of per-frame output samples (from 1 to INT_MAX)

bandpass AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set band-width (from 0 to 999)
-w (double) ..F.A. set band-width (from 0 to 999)
-csg (int) ..F.A. use constant skirt gain (from 0 to 1)

bandreject AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set band-width (from 0 to 999)
-w (double) ..F.A. set band-width (from 0 to 999)

bass AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set shelf transition steep (from 0 to 99999)
-w (double) ..F.A. set shelf transition steep (from 0 to 99999)
-gain (double) ..F.A. set gain (from -900 to 900)
-g (double) ..F.A. set gain (from -900 to 900)

biquad AVOptions:
-a0 (double) ..F.A. (from 32767 to 32767)
-a1 (double) ..F.A. (from 32767 to 32767)
-a2 (double) ..F.A. (from 32767 to 32767)
-b0 (double) ..F.A. (from 32767 to 32767)
-b1 (double) ..F.A. (from 32767 to 32767)
-b2 (double) ..F.A. (from 32767 to 32767)

channel map filter AVOptions:
-map (string) ..F.A. A comma-separated list of input channel numbers in output order.
-channel_layout (string) ..F.A. Output channel layout.

channelsplit AVOptions:
-channel_layout (string) ..F.A. Input channel layout.

ebur128 AVOptions:
-video (int) ..FV.. set video output (from 0 to 1)
-size (image_size) ..FV.. set video size
-meter (int) ..FV.. set scale meter (+9 to +18) (from 9 to 18)

equalizer AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set band-width (from 0 to 999)
-w (double) ..F.A. set band-width (from 0 to 999)
-gain (double) ..F.A. set gain (from -900 to 900)
-g (double) ..F.A. set gain (from -900 to 900)

highpass AVOptions:
-frequency (double) ..F.A. set frequency (from 0 to 999999)
-f (double) ..F.A. set frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set width (from 0 to 99999)
-w (double) ..F.A. set width (from 0 to 99999)
-poles (int) ..F.A. set number of poles (from 1 to 2)
-p (int) ..F.A. set number of poles (from 1 to 2)

join filter AVOptions:
-inputs (int) ..F.A. Number of input streams. (from 1 to INT_MAX)
-channel_layout (string) ..F.A. Channel layout of the output stream.
-map (string) ..F.A. A comma-separated list of channels maps in the format 'input_stream.input_channel-output_channel.

lowpass AVOptions:
-frequency (double) ..F.A. set frequency (from 0 to 999999)
-f (double) ..F.A. set frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set width (from 0 to 99999)
-w (double) ..F.A. set width (from 0 to 99999)
-poles (int) ..F.A. set number of poles (from 1 to 2)
-p (int) ..F.A. set number of poles (from 1 to 2)

silencedetect AVOptions:
-n (double) ..F.A. set noise tolerance (from 0 to 1.79769e+308)
-noise (double) ..F.A. set noise tolerance (from 0 to 1.79769e+308)
-d (double) ..F.A. set minimum duration in seconds (from 0 to 86400)
-duration (double) ..F.A. set minimum duration in seconds (from 0 to 86400)

treble AVOptions:
-frequency (double) ..F.A. set central frequency (from 0 to 999999)
-f (double) ..F.A. set central frequency (from 0 to 999999)
-width_type (int) ..F.A. set filter-width type (from 1 to 4)
h ..F.A. Hz
q ..F.A. Q-Factor
o ..F.A. octave
s ..F.A. slope
-width (double) ..F.A. set shelf transition steep (from 0 to 99999)
-w (double) ..F.A. set shelf transition steep (from 0 to 99999)
-gain (double) ..F.A. set gain (from -900 to 900)
-g (double) ..F.A. set gain (from -900 to 900)

volume AVOptions:
-volume (double) ..F.A. set volume adjustment (from 0 to 8.38861e+06)
-precision (int) ..F.A. select mathematical precision (from 0 to 2)
fixed ..F.A. select 8-bit fixed-point
float ..F.A. select 32-bit floating-point
double ..F.A. select 64-bit floating-point

aevalsrc AVOptions:
-nb_samples (int) ..F.A. set the number of samples per requested frame (from 0 to INT_MAX)
-n (int) ..F.A. set the number of samples per requested frame (from 0 to INT_MAX)
-sample_rate (string) ..F.A. set the sample rate
-s (string) ..F.A. set the sample rate
-duration (string) ..F.A. set audio duration
-d (string) ..F.A. set audio duration
-channel_layout (string) ..F.A. set channel layout
-c (string) ..F.A. set channel layout

anullsrc AVOptions:
-channel_layout (string) ..F.A. set channel_layout
-cl (string) ..F.A. set channel_layout
-sample_rate (string) ..F.A. set sample rate
-r (string) ..F.A. set sample rate
-nb_samples (int) ..F.A. set the number of samples per requested frame (from 0 to INT_MAX)
-n (int) ..F.A. set the number of samples per requested frame (from 0 to INT_MAX)

ass AVOptions:
-filename (string) ..FV.. set the filename of file to read
-f (string) ..FV.. set the filename of file to read
-original_size (image_size) ..FV.. set the size of the original video (used to scale fonts)

blackdetect AVOptions:
-d (double) ..FV.. set minimum detected black duration in seconds (from 0 to 1.79769e+308)
-black_min_duration (double) ..FV.. set minimum detected black duration in seconds (from 0 to 1.79769e+308)
-picture_black_ratio_th (double) ..FV.. set the picture black ratio threshold (from 0 to 1)
-pic_th (double) ..FV.. set the picture black ratio threshold (from 0 to 1)
-pixel_black_th (double) ..FV.. set the pixel black threshold (from 0 to 1)
-pix_th (double) ..FV.. set the pixel black threshold (from 0 to 1)

blend AVOptions:
-c0_mode (int) ..FV.. set component #0 blend mode (from 0 to 23)
addition ..FV..
and ..FV..
average ..FV..
burn ..FV..
darken ..FV..
difference ..FV..
divide ..FV..
dodge ..FV..
exclusion ..FV..
hardlight ..FV..
lighten ..FV..
multiply ..FV..
negation ..FV..
normal ..FV..
or ..FV..
overlay ..FV..
phoenix ..FV..
pinlight ..FV..
reflect ..FV..
screen ..FV..
softlight ..FV..
subtract ..FV..
vividlight ..FV..
xor ..FV..
-c1_mode (int) ..FV.. set component #1 blend mode (from 0 to 23)
addition ..FV..
and ..FV..
average ..FV..
burn ..FV..
darken ..FV..
difference ..FV..
divide ..FV..
dodge ..FV..
exclusion ..FV..
hardlight ..FV..
lighten ..FV..
multiply ..FV..
negation ..FV..
normal ..FV..
or ..FV..
overlay ..FV..
phoenix ..FV..
pinlight ..FV..
reflect ..FV..
screen ..FV..
softlight ..FV..
subtract ..FV..
vividlight ..FV..
xor ..FV..
-c2_mode (int) ..FV.. set component #2 blend mode (from 0 to 23)
addition ..FV..
and ..FV..
average ..FV..
burn ..FV..
darken ..FV..
difference ..FV..
divide ..FV..
dodge ..FV..
exclusion ..FV..
hardlight ..FV..
lighten ..FV..
multiply ..FV..
negation ..FV..
normal ..FV..
or ..FV..
overlay ..FV..
phoenix ..FV..
pinlight ..FV..
reflect ..FV..
screen ..FV..
softlight ..FV..
subtract ..FV..
vividlight ..FV..
xor ..FV..
-c3_mode (int) ..FV.. set component #3 blend mode (from 0 to 23)
addition ..FV..
and ..FV..
average ..FV..
burn ..FV..
darken ..FV..
difference ..FV..
divide ..FV..
dodge ..FV..
exclusion ..FV..
hardlight ..FV..
lighten ..FV..
multiply ..FV..
negation ..FV..
normal ..FV..
or ..FV..
overlay ..FV..
phoenix ..FV..
pinlight ..FV..
reflect ..FV..
screen ..FV..
softlight ..FV..
subtract ..FV..
vividlight ..FV..
xor ..FV..
-all_mode (int) ..FV.. set blend mode for all components (from -1 to 23)
addition ..FV..
and ..FV..
average ..FV..
burn ..FV..
darken ..FV..
difference ..FV..
divide ..FV..
dodge ..FV..
exclusion ..FV..
hardlight ..FV..
lighten ..FV..
multiply ..FV..
negation ..FV..
normal ..FV..
or ..FV..
overlay ..FV..
phoenix ..FV..
pinlight ..FV..
reflect ..FV..
screen ..FV..
softlight ..FV..
subtract ..FV..
vividlight ..FV..
xor ..FV..
-c0_expr (string) ..FV.. set color component #0 expression
-c1_expr (string) ..FV.. set color component #1 expression
-c2_expr (string) ..FV.. set color component #2 expression
-c3_expr (string) ..FV.. set color component #3 expression
-all_expr (string) ..FV.. set expression for all color components
-c0_opacity (double) ..FV.. set color component #0 opacity (from 0 to 1)
-c1_opacity (double) ..FV.. set color component #1 opacity (from 0 to 1)
-c2_opacity (double) ..FV.. set color component #2 opacity (from 0 to 1)
-c3_opacity (double) ..FV.. set color component #3 opacity (from 0 to 1)
-all_opacity (double) ..FV.. set opacity for all color components (from 0 to 1)

boxblur AVOptions:
-luma_radius (string) ..FV.. set luma radius
-lr (string) ..FV.. set luma radius
-luma_power (int) ..FV.. set luma power (from 0 to INT_MAX)
-lp (int) ..FV.. set luma power (from 0 to INT_MAX)
-chroma_radius (string) ..FV.. set chroma radius
-cr (string) ..FV.. set chroma radius
-chroma_power (int) ..FV.. set chroma power (from -1 to INT_MAX)
-cp (int) ..FV.. set chroma power (from -1 to INT_MAX)
-alpha_radius (string) ..FV.. set alpha radius
-ar (string) ..FV.. set alpha radius
-alpha_power (int) ..FV.. set alpha power (from -1 to INT_MAX)
-ap (int) ..FV.. set alpha power (from -1 to INT_MAX)

crop AVOptions:
-x (string) ..FV.. set the x crop area expression
-y (string) ..FV.. set the y crop area expression
-out_w (string) ..FV.. set the width crop area expression
-w (string) ..FV.. set the width crop area expression
-out_h (string) ..FV.. set the height crop area expression
-h (string) ..FV.. set the height crop area expression
-keep_aspect (int) ..FV.. keep aspect ratio (from 0 to 1)

decimate AVOptions:
-max (int) ..FV.. set the maximum number of consecutive dropped frames (positive), or the minimum interval between dropped frames (negative) (from INT_MIN to INT_MAX)
-hi (int) ..FV.. set high dropping threshold (from INT_MIN to INT_MAX)
-lo (int) ..FV.. set low dropping threshold (from INT_MIN to INT_MAX)
-frac (float) ..FV.. set fraction dropping threshold (from 0 to 1)

delogo AVOptions:
-x (int) ..FV.. set logo x position (from -1 to INT_MAX)
-y (int) ..FV.. set logo y position (from -1 to INT_MAX)
-w (int) ..FV.. set logo width (from -1 to INT_MAX)
-h (int) ..FV.. set logo height (from -1 to INT_MAX)
-band (int) ..FV.. set delogo area band size (from -1 to INT_MAX)
-t (int) ..FV.. set delogo area band size (from -1 to INT_MAX)
-show (int) ..FV.. show delogo area (from 0 to 1)

deshake AVOptions:
-x (int) ..FV.. set x for the rectangular search area (from -1 to INT_MAX)
-y (int) ..FV.. set y for the rectangular search area (from -1 to INT_MAX)
-w (int) ..FV.. set width for the rectangular search area (from -1 to INT_MAX)
-h (int) ..FV.. set height for the rectangular search area (from -1 to INT_MAX)
-rx (int) ..FV.. set x for the rectangular search area (from 0 to 64)
-ry (int) ..FV.. set y for the rectangular search area (from 0 to 64)
-edge (int) ..FV.. set edge mode (from 0 to 3)
blank ..FV.. fill zeroes at blank locations
original ..FV.. original image at blank locations
clamp ..FV.. extruded edge value at blank locations
mirror ..FV.. mirrored edge at blank locations
-blocksize (int) ..FV.. set motion search blocksize (from 4 to 128)
-contrast (int) ..FV.. set contrast threshold for blocks (from 1 to 255)
-search (int) ..FV.. set search strategy (from 0 to 1)
exhaustive ..FV.. exhaustive search
less ..FV.. less exhaustive search
-filename (string) ..FV.. set motion search detailed log file name

drawbox AVOptions:
-x (int) ..FV.. set the box top-left corner x position (from INT_MIN to INT_MAX)
-y (int) ..FV.. set the box top-left corner y position (from INT_MIN to INT_MAX)
-width (int) ..FV.. set the box width (from 0 to INT_MAX)
-w (int) ..FV.. set the box width (from 0 to INT_MAX)
-height (int) ..FV.. set the box height (from 0 to INT_MAX)
-h (int) ..FV.. set the box height (from 0 to INT_MAX)
-color (string) ..FV.. set the box edge color
-c (string) ..FV.. set the box edge color
-thickness (int) ..FV.. set the box maximum thickness (from 0 to INT_MAX)
-t (int) ..FV.. set the box maximum thickness (from 0 to INT_MAX)

drawtext AVOptions:
-fontfile (string) ..FV.. set font file
-text (string) ..FV.. set text
-textfile (string) ..FV.. set text file
-fontcolor (string) ..FV.. set foreground color
-boxcolor (string) ..FV.. set box color
-shadowcolor (string) ..FV.. set shadow color
-box (int) ..FV.. set box (from 0 to 1)
-fontsize (int) ..FV.. set font size (from 0 to INT_MAX)
-x (string) ..FV.. set x expression
-y (string) ..FV.. set y expression
-shadowx (int) ..FV.. set x (from INT_MIN to INT_MAX)
-shadowy (int) ..FV.. set y (from INT_MIN to INT_MAX)
-tabsize (int) ..FV.. set tab size (from 0 to INT_MAX)
-basetime (int64) ..FV.. set base time (from I64_MIN to I64_MAX)
-draw (string) ..FV.. if false do not draw
-expansion (int) ..FV.. set the expansion mode (from 0 to 2)
none ..FV.. set no expansion
normal ..FV.. set normal expansion
strftime ..FV.. set strftime expansion (deprecated)
-timecode (string) ..FV.. set initial timecode
-tc24hmax (int) ..FV.. set 24 hours max (timecode only) (from 0 to 1)
-timecode_rate (rational) ..FV.. set rate (timecode only) (from 0 to INT_MAX)
-r (rational) ..FV.. set rate (timecode only) (from 0 to INT_MAX)
-rate (rational) ..FV.. set rate (timecode only) (from 0 to INT_MAX)
-reload (int) ..FV.. reload text file for each frame (from 0 to 1)
-fix_bounds (int) ..FV.. if true, check and fix text coords to avoid clipping (from 0 to 1)
-ft_load_flags (flags) ..FV.. set font loading flags for libfreetype
default ..FV.. set default
no_scale ..FV.. set no_scale
no_hinting ..FV.. set no_hinting
render ..FV.. set render
no_bitmap ..FV.. set no_bitmap
vertical_layout ..FV.. set vertical_layout
force_autohint ..FV.. set force_autohint
crop_bitmap ..FV.. set crop_bitmap
pedantic ..FV.. set pedantic
ignore_global_advance_width ..FV.. set ignore_global_advance_width
no_recurse ..FV.. set no_recurse
ignore_transform ..FV.. set ignore_transform
monochrome ..FV.. set monochrome
linear_design ..FV.. set linear_design
no_autohint ..FV.. set no_autohint

edgedetect AVOptions:
-high (double) ..FV.. set high threshold (from 0 to 1)
-low (double) ..FV.. set low threshold (from 0 to 1)

fade AVOptions:
-type (string) ..FV.. set the fade direction
-t (string) ..FV.. set the fade direction
-start_frame (int) ..FV.. set expression of frame to start fading (from 0 to INT_MAX)
-s (int) ..FV.. set expression of frame to start fading (from 0 to INT_MAX)
-nb_frames (int) ..FV.. set expression for fade duration in frames (from 0 to INT_MAX)
-n (int) ..FV.. set expression for fade duration in frames (from 0 to INT_MAX)
-alpha (int) ..FV.. fade alpha if it is available on the input (from 0 to 1)

field AVOptions:
-type (int) ..FV.. set field type (top or bottom) (from 0 to 1)
top ..FV.. select top field
bottom ..FV.. select bottom field

fps AVOptions:
-fps (string) ..FV.. A string describing desired output framerate
-round (int) ..FV.. set rounding method for timestamps (from 0 to 5)
zero ..FV.. round towards 0
inf ..FV.. round away from 0
down ..FV.. round towards -infty
up ..FV.. round towards +infty
near ..FV.. round to nearest

geq AVOptions:
-lum_expr (string) ..FV.. set luminance expression
-cb_expr (string) ..FV.. set chroma blue expression
-cr_expr (string) ..FV.. set chroma red expression
-alpha_expr (string) ..FV.. set alpha expression

gradfun AVOptions:
-strength (double) ..FV.. set the maximum amount by which the filter will change any one pixel (from 0.51 to 64)
-radius (int) ..FV.. set the neighborhood to fit the gradient to (from 4 to 32)

histeq AVOptions:
-strength (float) ..FV.. set the strength (from 0 to 1)
-intensity (float) ..FV.. set the intensity (from 0 to 1)
-antibanding (int) ..FV.. set the antibanding level (from 0 to 2)
none ..FV.. apply no antibanding
weak ..FV.. apply weak antibanding
strong ..FV.. apply strong antibanding

histogram AVOptions:
-mode (int) ..FV.. set histogram mode (from 0 to 3)
levels ..FV.. standard histogram
waveform ..FV.. per row/column luminance graph
color ..FV.. chroma values in vectorscope
color2 ..FV.. chroma values in vectorscope
-level_height (int) ..FV.. set level height (from 50 to 2048)
-scale_height (int) ..FV.. set scale height (from 0 to 40)
-step (int) ..FV.. set waveform step value (from 1 to 255)
-waveform_mode (int) ..FV.. set waveform mode (from 0 to 1)
row ..FV..
column ..FV..
-display_mode (int) ..FV.. set display mode (from 0 to 1)
parade ..FV..
overlay ..FV..

hue AVOptions:
-h (string) ..FV.. set the hue angle degrees expression
-H (string) ..FV.. set the hue angle radians expression
-s (string) ..FV.. set the saturation expression

idet AVOptions:
-intl_thres (float) ..FV.. set interlacing threshold (from -1 to FLT_MAX)
-prog_thres (float) ..FV.. set progressive threshold (from -1 to FLT_MAX)

il AVOptions:
-luma_mode (int) ..FV.. select luma mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-l (int) ..FV.. select luma mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-chroma_mode (int) ..FV.. select chroma mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-c (int) ..FV.. select chroma mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-alpha_mode (int) ..FV.. select alpha mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-a (int) ..FV.. select alpha mode (from 0 to 2)
none ..FV..
interleave ..FV..
i ..FV..
deinterleave ..FV..
d ..FV..
-luma_swap (int) ..FV.. swap luma fields (from 0 to 1)
-ls (int) ..FV.. swap luma fields (from 0 to 1)
-chroma_swap (int) ..FV.. swap chroma fields (from 0 to 1)
-cs (int) ..FV.. swap chroma fields (from 0 to 1)
-alpha_swap (int) ..FV.. swap alpha fields (from 0 to 1)
-as (int) ..FV.. swap alpha fields (from 0 to 1)

kerndeint AVOptions:
-thresh (int) ..FV.. set the threshold (from 0 to 255)
-map (int) ..FV.. set the map (from 0 to 1)
-order (int) ..FV.. set the order (from 0 to 1)
-sharp (int) ..FV.. enable sharpening (from 0 to 1)
-twoway (int) ..FV.. enable twoway (from 0 to 1)

lut AVOptions:
-c0 (string) ..FV.. set component #0 expression
-c1 (string) ..FV.. set component #1 expression
-c2 (string) ..FV.. set component #2 expression
-c3 (string) ..FV.. set component #3 expression
-y (string) ..FV.. set Y expression
-u (string) ..FV.. set U expression
-v (string) ..FV.. set V expression
-r (string) ..FV.. set R expression
-g (string) ..FV.. set G expression
-b (string) ..FV.. set B expression
-a (string) ..FV.. set A expression

lutrgb AVOptions:
-c0 (string) ..FV.. set component #0 expression
-c1 (string) ..FV.. set component #1 expression
-c2 (string) ..FV.. set component #2 expression
-c3 (string) ..FV.. set component #3 expression
-y (string) ..FV.. set Y expression
-u (string) ..FV.. set U expression
-v (string) ..FV.. set V expression
-r (string) ..FV.. set R expression
-g (string) ..FV.. set G expression
-b (string) ..FV.. set B expression
-a (string) ..FV.. set A expression

lutyuv AVOptions:
-c0 (string) ..FV.. set component #0 expression
-c1 (string) ..FV.. set component #1 expression
-c2 (string) ..FV.. set component #2 expression
-c3 (string) ..FV.. set component #3 expression
-y (string) ..FV.. set Y expression
-u (string) ..FV.. set U expression
-v (string) ..FV.. set V expression
-r (string) ..FV.. set R expression
-g (string) ..FV.. set G expression
-b (string) ..FV.. set B expression
-a (string) ..FV.. set A expression

negate AVOptions:
-c0 (string) ..FV.. set component #0 expression
-c1 (string) ..FV.. set component #1 expression
-c2 (string) ..FV.. set component #2 expression
-c3 (string) ..FV.. set component #3 expression
-y (string) ..FV.. set Y expression
-u (string) ..FV.. set U expression
-v (string) ..FV.. set V expression
-r (string) ..FV.. set R expression
-g (string) ..FV.. set G expression
-b (string) ..FV.. set B expression
-a (string) ..FV.. set A expression

noise AVOptions:
-all_seed (int) ..FV.. set component #0 noise seed (from -1 to INT_MAX)
-all_strength (int) ..FV.. set component #0 strength (from 0 to 100)
-alls (int) ..FV.. set component #0 strength (from 0 to 100)
-all_flags (flags) ..FV.. set component #0 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-allf (flags) ..FV.. set component #0 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c0_seed (int) ..FV.. set component #0 noise seed (from -1 to INT_MAX)
-c0_strength (int) ..FV.. set component #0 strength (from 0 to 100)
-c0s (int) ..FV.. set component #0 strength (from 0 to 100)
-c0_flags (flags) ..FV.. set component #0 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c0f (flags) ..FV.. set component #0 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c1_seed (int) ..FV.. set component #1 noise seed (from -1 to INT_MAX)
-c1_strength (int) ..FV.. set component #1 strength (from 0 to 100)
-c1s (int) ..FV.. set component #1 strength (from 0 to 100)
-c1_flags (flags) ..FV.. set component #1 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c1f (flags) ..FV.. set component #1 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c2_seed (int) ..FV.. set component #2 noise seed (from -1 to INT_MAX)
-c2_strength (int) ..FV.. set component #2 strength (from 0 to 100)
-c2s (int) ..FV.. set component #2 strength (from 0 to 100)
-c2_flags (flags) ..FV.. set component #2 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c2f (flags) ..FV.. set component #2 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c3_seed (int) ..FV.. set component #3 noise seed (from -1 to INT_MAX)
-c3_strength (int) ..FV.. set component #3 strength (from 0 to 100)
-c3s (int) ..FV.. set component #3 strength (from 0 to 100)
-c3_flags (flags) ..FV.. set component #3 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise
-c3f (flags) ..FV.. set component #3 flags
a ..FV.. averaged noise
p ..FV.. (semi)regular pattern
q ..FV.. high quality
t ..FV.. temporal noise
u ..FV.. uniform noise

overlay AVOptions:
-x (string) ..FV.. set the x expression
-y (string) ..FV.. set the y expression
-rgb (int) ..FV.. force packed RGB in input and output (deprecated) (from 0 to 1)
-shortest (int) ..FV.. force termination when the shortest input terminates (from 0 to 1)
-format (int) ..FV.. set output format (from 0 to 2)
yuv420 ..FV..
yuv444 ..FV..
rgb ..FV..

pad AVOptions:
-width (string) ..FV.. set the pad area width expression
-w (string) ..FV.. set the pad area width expression
-height (string) ..FV.. set the pad area height expression
-h (string) ..FV.. set the pad area height expression
-x (string) ..FV.. set the x offset expression for the input image position
-y (string) ..FV.. set the y offset expression for the input image position
-color (string) ..FV.. set the color of the padded area border

scale AVOptions:
-w (string) ..FV.. set width expression
-width (string) ..FV.. set width expression
-h (string) ..FV.. set height expression
-height (string) ..FV.. set height expression
-flags (string) ..FV.. set libswscale flags
-interl (int) ..FV.. set interlacing (from -1 to 1)

select AVOptions:
-expr (string) ..F... set selection expression
-e (string) ..F... set selection expression

sendcmd AVOptions:
-commands (string) ..F... set commands
-c (string) ..F... set commands
-filename (string) ..F... set commands file
-f (string) ..F... set commands file

setdar AVOptions:
-max (int) ..FV.. set max value for nominator or denominator in the ratio (from 1 to INT_MAX)
-ratio (string) ..FV.. set ratio
-r (string) ..FV.. set ratio

setfield AVOptions:
-mode (int) ..FV.. select interlace mode (from -1 to 2)
auto ..FV.. keep the same input field
bff ..FV.. mark as bottom-field-first
tff ..FV.. mark as top-field-first
prog ..FV.. mark as progressive

setsar AVOptions:
-max (int) ..FV.. set max value for nominator or denominator in the ratio (from 1 to INT_MAX)
-ratio (string) ..FV.. set ratio
-r (string) ..FV.. set ratio

stereo3d AVOptions:
-in (int) ..FV.. set input format (from 18 to 25)
ab2l ..FV.. above below half height left first
ab2r ..FV.. above below half height right first
abl ..FV.. above below left first
abr ..FV.. above below right first
sbs2l ..FV.. side by side half width left first
sbs2r ..FV.. side by side half width right first
sbsl ..FV.. side by side left first
sbsr ..FV.. side by side right first
-out (int) ..FV.. set output format (from 0 to 25)
ab2l ..FV.. above below half height left first
ab2r ..FV.. above below half height right first
abl ..FV.. above below left first
abr ..FV.. above below right first
agmc ..FV.. anaglyph green magenta color
agmd ..FV.. anaglyph green magenta dubois
agmg ..FV.. anaglyph green magenta gray
agmh ..FV.. anaglyph green magenta half color
arbg ..FV.. anaglyph red blue gray
arcc ..FV.. anaglyph red cyan color
arcd ..FV.. anaglyph red cyan dubois
arcg ..FV.. anaglyph red cyan gray
arch ..FV.. anaglyph red cyan half color
argg ..FV.. anaglyph red green gray
aybc ..FV.. anaglyph yellow blue color
aybd ..FV.. anaglyph yellow blue dubois
aybg ..FV.. anaglyph yellow blue gray
aybh ..FV.. anaglyph yellow blue half color
irl ..FV.. interleave rows left first
irr ..FV.. interleave rows right first
ml ..FV.. mono left
mr ..FV.. mono right
sbs2l ..FV.. side by side half width left first
sbs2r ..FV.. side by side half width right first
sbsl ..FV.. side by side left first
sbsr ..FV.. side by side right first

subtitles AVOptions:
-filename (string) ..FV.. set the filename of file to read
-f (string) ..FV.. set the filename of file to read
-original_size (image_size) ..FV.. set the size of the original video (used to scale fonts)
-charenc (string) ..FV.. set input character encoding

tile AVOptions:
-layout (image_size) ..FV.. set grid size
-margin (int) ..FV.. set outer border margin in pixels (from 0 to 1024)
-padding (int) ..FV.. set inner border thickness in pixels (from 0 to 1024)
-nb_frames (int) ..FV.. set maximum number of frame to render (from 0 to INT_MAX)

tinterlace AVOptions:
-mode (int) ..FV.. select interlace mode (from 0 to 6)
merge ..FV.. merge fields
drop_even ..FV.. drop even fields
drop_odd ..FV.. drop odd fields
pad ..FV.. pad alternate lines with black
interleave_top ..FV.. interleave top and bottom fields
interleave_bottom ..FV.. interleave bottom and top fields
interlacex2 ..FV.. interlace fields from two consecutive frames

transpose AVOptions:
-dir (int) ..FV.. set transpose direction (from 0 to 7)
-passthrough (int) ..FV.. do not apply transposition if the input matches the specified geometry (from 0 to INT_MAX)
none ..FV.. always apply transposition
portrait ..FV.. preserve portrait geometry
landscape ..FV.. preserve landscape geometry

unsharp AVOptions:

yadif AVOptions:
-mode (int) ..FV.. specify the interlacing mode (from 0 to 3)
send_frame ..FV.. send one frame for each frame
send_field ..FV.. send one frame for each field
send_frame_nospatial ..FV.. send one frame for each frame, but skip spatial interlacing check
send_field_nospatial ..FV.. send one frame for each field, but skip spatial interlacing check
-parity (int) ..FV.. specify the assumed picture field parity (from -1 to 1)
tff ..FV.. assume top field first
bff ..FV.. assume bottom field first
auto ..FV.. auto detect parity
-deint (int) ..FV.. specify which frames to deinterlace (from 0 to 1)
all ..FV.. deinterlace all frames
interlaced ..FV.. only deinterlace frames marked as interlaced

cellauto AVOptions:
-filename (string) ..FV.. read initial pattern from file
-f (string) ..FV.. read initial pattern from file
-pattern (string) ..FV.. set initial pattern
-p (string) ..FV.. set initial pattern
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rule (int) ..FV.. set rule (from 0 to 255)
-random_fill_ratio (double) ..FV.. set fill ratio for filling initial grid randomly (from 0 to 1)
-ratio (double) ..FV.. set fill ratio for filling initial grid randomly (from 0 to 1)
-random_seed (int) ..FV.. set the seed for filling the initial grid randomly (from -1 to 4.29497e+09)
-seed (int) ..FV.. set the seed for filling the initial grid randomly (from -1 to 4.29497e+09)
-scroll (int) ..FV.. scroll pattern downward (from 0 to 1)
-start_full (int) ..FV.. start filling the whole video (from 0 to 1)
-full (int) ..FV.. start filling the whole video (from 0 to 1)
-stitch (int) ..FV.. stitch boundaries (from 0 to 1)

color AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-sar (rational) ..FV.. set video sample aspect ratio (from 0 to INT_MAX)
-color (string) ..FV.. set color
-c (string) ..FV.. set color
-decimals (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)
-n (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)

life AVOptions:
-filename (string) ..FV.. set source file
-f (string) ..FV.. set source file
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-rule (string) ..FV.. set rule
-random_fill_ratio (double) ..FV.. set fill ratio for filling initial grid randomly (from 0 to 1)
-ratio (double) ..FV.. set fill ratio for filling initial grid randomly (from 0 to 1)
-random_seed (int) ..FV.. set the seed for filling the initial grid randomly (from -1 to 4.29497e+09)
-seed (int) ..FV.. set the seed for filling the initial grid randomly (from -1 to 4.29497e+09)
-stitch (int) ..FV.. stitch boundaries (from 0 to 1)
-mold (int) ..FV.. set mold speed for dead cells (from 0 to 255)
-life_color (string) ..FV.. set life color
-death_color (string) ..FV.. set death color
-mold_color (string) ..FV.. set mold color

mandelbrot AVOptions:
-size (image_size) ..FV.. set frame size
-s (image_size) ..FV.. set frame size
-rate (string) ..FV.. set frame rate
-r (string) ..FV.. set frame rate
-maxiter (int) ..FV.. set max iterations number (from 1 to INT_MAX)
-start_x (double) ..FV.. set the initial x position (from -100 to 100)
-start_y (double) ..FV.. set the initial y position (from -100 to 100)
-start_scale (double) ..FV.. set the initial scale value (from 0 to FLT_MAX)
-end_scale (double) ..FV.. set the terminal scale value (from 0 to FLT_MAX)
-end_pts (double) ..FV.. set the terminal pts value (from 0 to I64_MAX)
-bailout (double) ..FV.. set the bailout value (from 0 to FLT_MAX)
-outer (int) ..FV.. set outer coloring mode (from 0 to INT_MAX)
iteration_count ..FV.. set iteration count mode
normalized_iteration_count ..FV.. set normalized iteration count mode
-inner (int) ..FV.. set inner coloring mode (from 0 to INT_MAX)
black ..FV.. set black mode
period ..FV.. set period mode
convergence ..FV.. show time until convergence
mincol ..FV.. color based on point closest to the origin of the iterations

mptestsrc AVOptions:
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-test (int) ..FV.. set test to perform (from 0 to INT_MAX)
dc_luma ..FV..
dc_chroma ..FV..
freq_luma ..FV..
freq_chroma ..FV..
amp_luma ..FV..
amp_chroma ..FV..
cbp ..FV..
mv ..FV..
ring1 ..FV..
ring2 ..FV..
all ..FV..
-t (int) ..FV.. set test to perform (from 0 to INT_MAX)
dc_luma ..FV..
dc_chroma ..FV..
freq_luma ..FV..
freq_chroma ..FV..
amp_luma ..FV..
amp_chroma ..FV..
cbp ..FV..
mv ..FV..
ring1 ..FV..
ring2 ..FV..
all ..FV..

nullsrc AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-sar (rational) ..FV.. set video sample aspect ratio (from 0 to INT_MAX)
-color (string) ..FV.. set color
-c (string) ..FV.. set color
-decimals (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)
-n (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)

rgbtestsrc AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-sar (rational) ..FV.. set video sample aspect ratio (from 0 to INT_MAX)
-color (string) ..FV.. set color
-c (string) ..FV.. set color
-decimals (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)
-n (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)

smptebars AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-sar (rational) ..FV.. set video sample aspect ratio (from 0 to INT_MAX)
-color (string) ..FV.. set color
-c (string) ..FV.. set color
-decimals (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)
-n (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)

testsrc AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-duration (string) ..FV.. set video duration
-d (string) ..FV.. set video duration
-sar (rational) ..FV.. set video sample aspect ratio (from 0 to INT_MAX)
-color (string) ..FV.. set color
-c (string) ..FV.. set color
-decimals (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)
-n (int) ..FV.. set number of decimals to show (from INT_MIN to INT_MAX)

concat AVOptions:
-n (int) ..FVA. specify the number of segments (from 2 to INT_MAX)
-v (int) ..FV.. specify the number of video streams (from 0 to INT_MAX)
-a (int) ..F.A. specify the number of audio streams (from 0 to INT_MAX)
-unsafe (int) ..F.A. enable unsafe mode (from 0 to INT_MAX)

showspectrum AVOptions:
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-slide (int) ..FV.. set sliding mode (from 0 to 1)
-mode (int) ..FV.. set channel display mode (from 0 to 1)
combined ..FV.. combined mode
separate ..FV.. separate mode
-color (int) ..FV.. set channel coloring (from 0 to 1)
channel ..FV.. separate color for each channel
intensity ..FV.. intensity based coloring
-scale (int) ..FV.. set display scale (from 0 to 3)
sqrt ..FV.. square root
cbrt ..FV.. cubic root
log ..FV.. logarithmic
lin ..FV.. linear
-saturation (float) ..FV.. color saturation multiplier (from -10 to 10)

showwaves AVOptions:
-rate (string) ..FV.. set video rate
-r (string) ..FV.. set video rate
-size (image_size) ..FV.. set video size
-s (image_size) ..FV.. set video size
-n (int) ..FV.. set how many samples to show in the same point (from 0 to INT_MAX)
-mode (int) ..FV.. select display mode (from 0 to 1)
point ..FV.. draw a point for each sample
line ..FV.. draw a line for each sample

amovie AVOptions:
-format_name (string) ..F... set format name
-f (string) ..F... set format name
-streams (string) ..F... set streams
-s (string) ..F... set streams
-si (int) ..F... set stream index (from -1 to INT_MAX)
-stream_index (int) ..F... set stream index (from -1 to INT_MAX)
-seek_point (double) ..F... set seekpoint (seconds) (from 0 to 9.22337e+12)
-sp (double) ..F... set seekpoint (seconds) (from 0 to 9.22337e+12)
-loop (int) ..F... set loop count (from 0 to INT_MAX)

movie AVOptions:
-format_name (string) ..F... set format name
-f (string) ..F... set format name
-streams (string) ..F... set streams
-s (string) ..F... set streams
-si (int) ..F... set stream index (from -1 to INT_MAX)
-stream_index (int) ..F... set stream index (from -1 to INT_MAX)
-seek_point (double) ..F... set seekpoint (seconds) (from 0 to 9.22337e+12)
-sp (double) ..F... set seekpoint (seconds) (from 0 to 9.22337e+12)
-loop (int) ..F... set loop count (from 0 to INT_MAX)

abuffer AVOptions:
-time_base (rational) ..F.A. (from 0 to INT_MAX)
-sample_rate (int) ..F.A. (from 0 to INT_MAX)
-sample_fmt (string) ..F.A.
-channels (int) ..F.A. (from 0 to INT_MAX)
-channel_layout (string) ..F.A.

buffer AVOptions:
-time_base (rational) ..FV.. (from 0 to INT_MAX)
-frame_rate (rational) ..FV.. (from 0 to INT_MAX)
-video_size (image_size) ..FV..
-pix_fmt (pix_fmt) ..FV..
-pixel_aspect (rational) ..FV.. (from 0 to INT_MAX)
-sws_param (string) ..FV..

MacBookPro:~ tom$ /Applications/動画編集/ffmpeg-1.2.7/ffmpeg -formats
ffmpeg version 1.2-tessus Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 15 2013 01:18:55 with llvm-gcc 4.2.1 (LLVM build 2336.1.00)
configuration: --prefix=/Users/tessus/data/ext/ffmpeg/sw --as=yasm --extra-version=tessus --disable-shared --enable-static --disable-ffplay --enable-gpl --enable-pthreads --enable-postproc --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-libspeex --enable-bzlib --enable-zlib --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libxavs --enable-version3 --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvpx --enable-libgsm --enable-libopus --enable-fontconfig --enable-libfreetype --enable-libass --enable-filters --enable-runtime-cpudetect
libavutil 52. 18.100 / 52. 18.100
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.104 / 54. 63.104
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 42.103 / 3. 42.103
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
File formats:
D. = Demuxing supported
.E = Muxing supported
--
E 3g2 3GP2 (3GPP2 file format)
E 3gp 3GP (3GPP file format)
D 4xm 4X Technologies
E a64 a64 - video for Commodore 64
D aac raw ADTS AAC (Advanced Audio Coding)
DE ac3 raw AC-3
D act ACT Voice file format
D adf Artworx Data Format
E adts ADTS AAC (Advanced Audio Coding)
DE adx CRI ADX
D aea MD STUDIO audio
D afc AFC
DE aiff Audio IFF
DE alaw PCM A-law
DE amr 3GPP AMR
D anm Deluxe Paint Animation
D apc CRYO APC
D ape Monkey's Audio
D aqtitle AQTitle subtitles
DE asf ASF (Advanced / Active Streaming Format)
E asf_stream ASF (Advanced / Active Streaming Format)
DE ass SSA (SubStation Alpha) subtitle
DE ast AST (Audio Stream)
DE au Sun AU
DE avi AVI (Audio Video Interleaved)
E avm2 SWF (ShockWave Flash) (AVM2)
D avr AVR (Audio Visual Research)
D avs AVS
D bethsoftvid Bethesda Softworks VID
D bfi Brute Force & Ignorance
D bin Binary text
D bink Bink
DE bit G.729 BIT file format
D bmv Discworld II BMV
D brstm BRSTM (Binary Revolution Stream)
D c93 Interplay C93
DE caf Apple CAF (Core Audio Format)
DE cavsvideo raw Chinese AVS (Audio Video Standard) video
D cdg CD Graphics
D cdxl Commodore CDXL video
D concat Virtual concatenation script
E crc CRC testing
DE daud D-Cinema audio
D dfa Chronomaster DFA
DE dirac raw Dirac
DE dnxhd raw DNxHD (SMPTE VC-3)
D dsicin Delphine Software International CIN
DE dts raw DTS
D dtshd raw DTS-HD
DE dv DV (Digital Video)
E dvd MPEG-2 PS (DVD VOB)
D dxa DXA
D ea Electronic Arts Multimedia
D ea_cdata Electronic Arts cdata
DE eac3 raw E-AC-3
D epaf Ensoniq Paris Audio File
DE f32be PCM 32-bit floating-point big-endian
DE f32le PCM 32-bit floating-point little-endian
E f4v F4V Adobe Flash Video
DE f64be PCM 64-bit floating-point big-endian
DE f64le PCM 64-bit floating-point little-endian
DE ffm FFM (FFserver live feed)
DE ffmetadata FFmpeg metadata in text
D film_cpk Sega FILM / CPK
DE filmstrip Adobe Filmstrip
DE flac raw FLAC
D flic FLI/FLC/FLX animation
DE flv FLV (Flash Video)
E framecrc framecrc testing
E framemd5 Per-frame MD5 testing
D frm Megalux Frame
DE g722 raw G.722
DE g723_1 raw G.723.1
D g729 G.729 raw format demuxer
DE gif GIF Animation
D gsm raw GSM
DE gxf GXF (General eXchange Format)
DE h261 raw H.261
DE h263 raw H.263
DE h264 raw H.264 video
E hls Apple HTTP Live Streaming
D hls,applehttp Apple HTTP Live Streaming
DE ico Microsoft Windows ICO
D idcin id Cinematic
D idf iCE Draw File
D iff IFF (Interchange File Format)
DE ilbc iLBC storage
DE image2 image2 sequence
DE image2pipe piped image2 sequence
D ingenient raw Ingenient MJPEG
D ipmovie Interplay MVE
E ipod iPod H.264 MP4 (MPEG-4 Part 14)
DE ircam Berkeley/IRCAM/CARL Sound Format
E ismv ISMV/ISMA (Smooth Streaming)
D iss Funcom ISS
D iv8 IndigoVision 8000 video
DE ivf On2 IVF
DE jacosub JACOsub subtitle format
D jv Bitmap Brothers JV
DE latm LOAS/LATM
D lavfi Libavfilter virtual input device
D lmlm4 raw lmlm4
D loas LOAS AudioSyncStream
D lvf LVF
D lxf VR native stream (LXF)
DE m4v raw MPEG-4 video
E matroska Matroska
D matroska,webm Matroska / WebM
E md5 MD5 testing
D mgsts Metal Gear Solid: The Twin Snakes
DE microdvd MicroDVD subtitle format
DE mjpeg raw MJPEG video
E mkvtimestamp_v2 extract pts as timecode v2 format, as defined by mkvtoolnix
DE mlp raw MLP
D mm American Laser Games MM
DE mmf Yamaha SMAF
E mov QuickTime / MOV
D mov,mp4,m4a,3gp,3g2,mj2 QuickTime / MOV
E mp2 MP2 (MPEG audio layer 2)
DE mp3 MP3 (MPEG audio layer 3)
E mp4 MP4 (MPEG-4 Part 14)
D mpc Musepack
D mpc8 Musepack SV8
DE mpeg MPEG-1 Systems / MPEG program stream
E mpeg1video raw MPEG-1 video
E mpeg2video raw MPEG-2 video
DE mpegts MPEG-TS (MPEG-2 Transport Stream)
D mpegtsraw raw MPEG-TS (MPEG-2 Transport Stream)
D mpegvideo raw MPEG video
E mpjpeg MIME multipart JPEG
D mpl2 MPL2 subtitles
D mpsub MPlayer subtitles
D msnwctcp MSN TCP Webcam stream
D mtv MTV
DE mulaw PCM mu-law
D mv Silicon Graphics Movie
D mvi Motion Pixels MVI
DE mxf MXF (Material eXchange Format)
E mxf_d10 MXF (Material eXchange Format) D-10 Mapping
D mxg MxPEG clip
D nc NC camera feed
D nistsphere NIST SPeech HEader REsources
D nsv Nullsoft Streaming Video
E null raw null video
DE nut NUT
D nuv NuppelVideo
DE ogg Ogg
DE oma Sony OpenMG audio
D paf Amazing Studio Packed Animation File
D pjs PJS (Phoenix Japanimation Society) subtitles
D pmp Playstation Portable PMP
E psp PSP MP4 (MPEG-4 Part 14)
D psxstr Sony Playstation STR
D pva TechnoTrend PVA
D pvf PVF (Portable Voice Format)
D qcp QCP
D r3d REDCODE R3D
DE rawvideo raw video
E rcv VC-1 test bitstream
D realtext RealText subtitle format
D rl2 RL2
DE rm RealMedia
DE roq raw id RoQ
D rpl RPL / ARMovie
DE rso Lego Mindstorms RSO
DE rtp RTP output
DE rtsp RTSP output
DE s16be PCM signed 16-bit big-endian
DE s16le PCM signed 16-bit little-endian
DE s24be PCM signed 24-bit big-endian
DE s24le PCM signed 24-bit little-endian
DE s32be PCM signed 32-bit big-endian
DE s32le PCM signed 32-bit little-endian
DE s8 PCM signed 8-bit
D sami SAMI subtitle format
DE sap SAP output
D sbg SBaGen binaural beats script
D sdp SDP
E segment segment
D shn raw Shorten
D siff Beam Software SIFF
DE smjpeg Loki SDL MJPEG
D smk Smacker
E smoothstreaming Smooth Streaming Muxer
D smush LucasArts Smush
D sol Sierra SOL
DE sox SoX native
DE spdif IEC 61937 (used on S/PDIF - IEC958)
DE srt SubRip subtitle
E stream_segment,ssegment streaming segment muxer
D subviewer SubViewer subtitle format
D subviewer1 SubViewer v1 subtitle format
E svcd MPEG-2 PS (SVCD)
DE swf SWF (ShockWave Flash)
D tak raw TAK
D tedcaptions TED Talks captions
E tee Multiple muxer tee
D thp THP
D tiertexseq Tiertex Limited SEQ
D tmv 8088flex TMV
DE truehd raw TrueHD
D tta TTA (True Audio)
D tty Tele-typewriter
D txd Renderware TeXture Dictionary
DE u16be PCM unsigned 16-bit big-endian
DE u16le PCM unsigned 16-bit little-endian
DE u24be PCM unsigned 24-bit big-endian
DE u24le PCM unsigned 24-bit little-endian
DE u32be PCM unsigned 32-bit big-endian
DE u32le PCM unsigned 32-bit little-endian
DE u8 PCM unsigned 8-bit
D vc1 raw VC-1
D vc1test VC-1 test bitstream
E vcd MPEG-1 Systems / MPEG program stream (VCD)
D vivo Vivo
D vmd Sierra VMD
E vob MPEG-2 PS (VOB)
D vobsub VobSub subtitle format
DE voc Creative Voice
D vplayer VPlayer subtitles
D vqf Nippon Telegraph and Telephone Corporation (NTT) TwinVQ
DE w64 Sony Wave64
DE wav WAV / WAVE (Waveform Audio)
D wc3movie Wing Commander III movie
E webm WebM
D webvtt WebVTT subtitle
D wsaud Westwood Studios audio
D wsvqa Westwood Studios VQA
DE wtv Windows Television (WTV)
DE wv WavPack
D xa Maxis XA
D xbin eXtended BINary text (XBIN)
D xmv Microsoft XMV
D xwma Microsoft xWMA
D yop Psygnosis YOP
DE yuv4mpegpipe YUV4MPEG pipe

関連記事